Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





99 Forester dashboard doesn't work.

adamt1adamt1 Posts: 1
I was driving my 99 Forester a few days ago and the entire dashboard went out except for the gas gauge. The turn signals, and power windows are also out. The power locks, center console, and headlights still work, so I know electrical is working. I checked the manual for fuse circuits and couldn't find anything that corresponded to the entire dashboard. Any ideas?

Comments

  • ateixeiraateixeira Posts: 72,587
    There must be a general lighting fuse, labeled as something else.

    What are the labels on the fuses? There are 2 fuse boxes, one in the engine, the other under the steering column. I imagine it would be the inside one.

    I no longer have my 98 to check.
  • saedavesaedave Chicago, ILPosts: 685
    There must be a general lighting fuse, labeled as something else

    The power windows require a fairly good size fuse and lighting has smaller current requirements. I'd look for that (windows) label first.
  • i am having the same issue ND I CHECKED ALL THE FUSES UNDER THE DASH BOARD AND UNDER THE HOOD AND EVERYTHING SEEMS TO BE OK BUT STILL NO SPEEDOMETER ODOMETER TEMP GAUGE THE WINDOWS DONT WORK AND NOW IT WILL NOT EVEN START JUST TURNS OVER PUT SOME STARTING FLUID IN THE AIR INTAKE SYSTEM AND IT WILL RUN BUT SHUTS OFF AFTER THE FUILD RUNS OUT
Sign In or Register to comment.