Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Mazda MPV: Problems & Solutions



  • My 2000 MPV emits a smell of exhaust and/or burning oil after starting in cold temps, for the first minute or two.

    Anyone else have that?

    Anyone know what it is?

  • The engine on my 1991 Mpv started idling at over 2000 rpm. It slowed and then would speed up during its idle. I shut it off and it did not start even though there was not a hint of it stalling before it was shut off. What's the possible problem?
  • steverstever YooperlandPosts: 40,006
    Try the Got a Quick, Technical Question? discussion.

    Steve, Host

    Need help navigating? - or send a private message by clicking on my name.

  • I could use help from somebody for a 2002 MPV with 50700 mmiles but not three years old. The transmission "blew" three weeks ago. You would think that they would honor the warranty and replace the transmission but so far they are refusing. Transmission has been checked, but not servicesd over the years AND the car was at Mazda for engine light recalls in December and they should have noticed an impending failure, I think. What do you think?
  • Hello mpvntexas,

    I have a 2003 with the same problem. I've only taken it in once, with no results, in correcting the issue along with a bad water pump. Like you said, it is difficult to duplicate the problem on demand. I've noticed with mine is if you get on the gas a little harder than usual, and let off (say as to make a red light and then turn a corner) and then back on the gas, it can feel as if the transmission is ready to fall out. A significiantly hard knock.

    I would be very appreciative if you could tell me if anything has been resolved with your vehicle. If any progress has been made, the name of the service center would also be very helpful. My wife and I have had to deal with our service center here on a VW Beetle, and basically we have come to the conclusion that they are basically idiots. (Moffit VW, Mazda, Audi, Porsche) But that another story.

    Thank You,
    Russ in Shreveport
  • nlsnls Posts: 65
    Has anyone got the work listed in TSB 07-001/03 performed at a dealership to resolve the odor problem from the vents when the a/c is turned on, and if so, did it work, and how much did it cost? It doesn't seem to be a do-it-yourself type of a thing, looking at the applicator and the cooling coil coating liquid that are indicated in the TSB.
  • PF_FlyerPF_Flyer Pennsylvania Furnace, PAPosts: 5,854
    Time for another chat session with your fellow forum residents! Should be another fun hour as we discuss the automotive (and some not-so-automotive) issues of the day.

    PF Flyer
    Pickups & News & Views Message Boards

    The MAZDA MANIA Chat is on tonight. Hope to see YOU there! Check out the schedule

    Need help navigating? - or send a private message by clicking on my name.
    Share your vehicle reviews

  • sweet_subiesweet_subie Posts: 1,394
    OK, guys. MY 2002 MPV only has 20k miles & Dunlop tires are pretty much gone. We all agree that Dunlop tires aren;t good (based on previous discussions).

    Which one would you recommend ? I need softer/comfortable ride. Don't like current MPV's tight ride
  • subearusubearu Posts: 3,613
    Start out at Tire Rack and plug in your MPV. There won't be much to choose from in the stock H-rated tires if you have the 17"-ers. Then try the 'other' available sizes and possibly stepping down to a lower speed rating. Try to keep the load rating of 95.

    That'll get you started.

  • jipsterjipster Posts: 5,345
    I've heard a lot of good things about the Michelin Hydroedge.
  • subearusubearu Posts: 3,613
    in fact, another mpv site I follow mentions someone who emailed Mazda about the 17" tires and stepping down to a T rated one. 225/55-17 in T will work.

  • sweet_subiesweet_subie Posts: 1,394
    waht is H, T ?
  • subearusubearu Posts: 3,613
    H and T are speed ratings. Tirerack has more information on them, but H is typically a stiffer tire than a T rated tire. Like I said before, the often forgotten piece is the load rating which is 95 on the MPV. You want the tire you get to replace the OEM's to have the same load rating.

    You want me to email more?

  • sweet_subiesweet_subie Posts: 1,394

    called the tire dealers around, i am really interested in Michellin Hydroedge 215/60/17 inch but it is T rated, load rating is over 95. Some dealer say they will NOT step down from what manufacturer says & it is dangerous to do so. others say i can step down one notch which is from H to T.

    Please help, can i step down from H to T ? any dangers ?
  • subearusubearu Posts: 3,613
    I've read/seen several other ES owners go to the Hydroedge w/o a problem. You *can* step down to a T rating, I noted text from a post on another site for you that stated it was ok to do so.

    I can't post a direct link to that information because it is not allowed here.

  • sweet_subiesweet_subie Posts: 1,394
    Thanks a lot. Tell me which site. you can mention the site not post links.

    I am so sick of the dunlop tires, i can count every bump on the road.
  • subearusubearu Posts: 3,613
    I've gotten posts pulled for just mentioning the site even without an actual link.

    Again, from what I've read on another mpv/mazda5 site, stepping down to T rated tires on the MPV is acceptable according to an email from MazdaUSA.

    I suppose you could email me.

  • i live in northern ohio and have a 2001 mpv...only 24000 miles....out of warranty for sure....had a leak in the supply lines to the rear heater and have had it suggested that is an$800 repair bill.....3.5 year old car and only 24000 miles....probably only about 8-10 thousand of those miles in the winter months....i will never buy another mazda and will make sure my friends and family hear my case too
  • sweet_subiesweet_subie Posts: 1,394
    call mazda & push them to pay. they will at atleast take 50% of bill, even if it out of warranty. my friend did it
  • sweet_subiesweet_subie Posts: 1,394
    no email address in your profile.
This discussion has been closed.