Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

A Mechanic's Life - Tales From Under the Hood



  • qbrozenqbrozen Posts: 17,148
    Hell, I use an old-school bubble balancer at home. I've mounted and balanced at least 20 sets ranging from 14" to 18" in the past few years this way without a problem. Its just what I'm used to. Its the same balancer I used back when I was 7 years old working in my dad's shop.

    '13 Stang GT; '86 Benz 300E; '98 Volvo S70; '12 Leaf; '14 Town&Country

  • thecardoc3thecardoc3 Posts: 1,521
    Hell, I use an old-school bubble balancer at home.

    You would add yourself to bearcats list of people who couldn't balance his tires with that.
  • thecardoc3thecardoc3 Posts: 1,521
    What was that I heard? You want the balance free with the tire purchase?
  • xwesxxwesx Fairbanks, AlaskaPosts: 8,391
    edited December 2012
    Yep, that's it, too!

    Most places around here do the mount/balance for about $60. The local Ford dealership charges $90 for theirs, but they also use the Hunter RF9700. What I find is that not only are the tires better balanced (although I've never had an out-of-balance that was noticeable at under 70 mph, which is where 99% of my driving occurs), but the amount of weight used to balance them seems to be considerably less. Of course, that's on the same rims, but with different tires, so the tires themselves could be the difference?

    I'm not sure why, but for some reason that just seems worth an extra $30 to me.

    The only thing that bugs me is that there isn't a differential rate for mounted vs. unmounted wheels (meaning on or off a vehicle). It seems to me that changing tires on rims that are mounted on a vehicle should take more time and effort than ones that are not... yet the price is the same. :confuse:
  • qbrozenqbrozen Posts: 17,148
    You would add yourself to bearcats list of people who couldn't balance his tires with that.

    Probably. Sounds like his wheels and/or tires are really messed up. Luckily, all the ones I have done haven't had that problem. I even balanced out the set that the BMW dealership told me was bent. Still running them now.

    '13 Stang GT; '86 Benz 300E; '98 Volvo S70; '12 Leaf; '14 Town&Country

  • explorerx4explorerx4 Central CTPosts: 9,614
    The tires and the wheels are not perfectly round.
    I'm pretty sure the there is a way to even that out, then balance the whole thing.
  • xwesxxwesx Fairbanks, AlaskaPosts: 8,391
    In talking with a guy at the Ford shop, he said the first thing they do when balancing is offset the heaviest point on the tire opposite the heaviest point on the wheel.

    Is that what you're saying?
  • I had tires balanced for years with the old bubble balancers, and, never had problems. My son has one. If he didn't live 200 miles from me, I'd took the Honda to him. Bet he'd done a better job than the chain tire store did. The Mercedes dealer here uses a road force balancer and gets 'em perfect. A couple of years ago, I needed tires for an 06 Jaguar, and had them pick up the tires from the tire store and mount and balance them. Yeah, it cost me a bit more - but - they actually found that two of the new tires were out of specification with the road force balancer, and, made the tire dealer replace them.
    Now a story about some of the crap I've run into. A few years ago, I went to a big national retailer and bought a set of tires for a 95 Chrysler LHS. I got the car back, and, headed home, which involved a 10 mile interstate run. As soon as I got on the interstate, I had violent wheel shake, so I went back to their auto center for a re-balance. From their waiting room, I was watching their guy work on my car. He didn't even put it on a lift or take the wheels off. As I watched, he took a tire pressure guage and let air out of all 4 tires. a few minutes later, they told me my car was all fixed. I went out, got my tire pressure guage out, and verified that I now had 25 psi in all 4 tires. I went back in, grabbed a store manager, and showed him what they did. Then I made him refund all the balancing charges, and, I went to another shop and had them balance the wheels correctly.

  • thecardoc3thecardoc3 Posts: 1,521
    Now a story about some of the crap I've run into

    Right back at you.

    I was given a repair order for a complaint of wheel/tire vibration. We used a bubble balancer back then and we would use four weights which had us putting the weights at a 60 degree angle on each side of the wheel. I could then slide the weights towards each other a little to make them "heavier" if I needed a little more weight or if I had a little too much I could slide them apart from each other to make them "lighter". Back in those days, this was easily "good enough". I road tested the car and it was fine. The next day the guy was back and it was vibrating like crazy again. I put the first tire on the balancer and it was off by about three ounces! I rebalanced the tire, but there was no way that I had missed by that much, something was going on here. I picked the tire up off of the balancer, and bounced it. and then put it back on. It was again off by three ounces.

    This guy had been using so much stop leak in his tires that it was like a ball of wet newspaper inside the tire, in fact all four of them were like that.

    I had to take the tires apart, clean all of that trash out of the tires, replaced the bad valve stems, cleaned the rust from wheel beads, and patched one of the tires and rebalanced them. I didn't get paid a cent for all of that because "it was a comeback".
  • they do charge more to take the tires off the car. I can get tires mounted and balanced for $10, including tire disposal. And, they're open, not 24 7 but almost all the time. National chain. I wouldn't let them touch anything on my car though.

    Interesting turn of discussion. My 03 Grand Marquis has a hard to fix slight back and forth wobble, and the Marauder guys say it's common, and needs road force balanced, with hot tires.

    That bugs the heck out of me.
  • imidazol97imidazol97 Crossroads of America: I70 & I75Posts: 18,048
    edited December 2012
    >slight back and forth wobble,

    I would assess that to be bad belts in a tire or bent rim. Out of round tires give more of an up and down movement.

    Road force balancers can ameliorate out-of-roundness due to differences in compression of the tire at different parts of its circumference. The tech measures the rim for its high point and then places the high part of the tire at the low part of the rim hoping they will reduce the effective out-of-roundness. If a tire or rim is out a lot, then the tech can move the tire to another rim which has more variation if available. After reducing out-of-roundness as much as possible, then the balancer spins the tire for dynamic balancing: they do not correct for out-of-roundness due to compression variation in the spin balancing.

    Does your waddle change if tires are moved to front/back?
  • qbrozenqbrozen Posts: 17,148
    damn. that's a good one.

    '13 Stang GT; '86 Benz 300E; '98 Volvo S70; '12 Leaf; '14 Town&Country

  • Thanks. That is very interesting.

    I've changed rims tires all tie rod ends lower bjs and upper control arms. I know that drives some folks crazy :) But boy, is the front end tighter, and each thing made the wobble a little smaller. Should've done the lower control arms and struts too while I was there, but it's all about the money. Looking forward to upgrading the struts.

    After much wailing and gnashing of teeth I found out that the 03+ panthers can have this problem. They are extremely sensitive to their balancing for some reason. I'll report back when I have the road force done.

    But what kills me (and comes back to this thread somewhat) is blankityblank reliability! Simplicity. My old cars might not handle as 'well', but I could balance the tires and drive away.

  • Mr_ShiftrightMr_Shiftright CaliforniaPosts: 44,408
    Okay, here's an interesting problem:

    A guy over in another topic has an Audi that eats the *inside* of his front tires every 10,000 miles. He insists that the suspension has been checked over, the car's been on a frame machine, and that there is no suspension problem. My contention was that it HAS to be a suspension problem (camber). Both tires wear pretty much equally on their insides, except he says that the driver's side a bit more perhaps.

    ideas? What besides a suspension problem could cause what seems to be symptomatic of excessive camber?


  • srs_49srs_49 Posts: 1,394
    Is he running original wheels and size tires?

    Couldn't an aftermarket wheel that had the incorrect offset cause that sort of wear?
  • fintailfintail Posts: 33,509
    My fintail used to do something like that. Worn kingpins. I am guessing the Audi lacks those :shades:
  • thecardoc3thecardoc3 Posts: 1,521
    It's best not to guess on this. Let's start with the alignment settings and specifications including the ackerman angle otherwise known as toe-out-on-turns.

    Wear on the inside edge of the tires is far more likely to be toe angle related today than camber.

    What kind of driving does he do, a combination of in-town and highway or does he tend to spend more time in town as compared to highway or vice-versa?
  • Mr_ShiftrightMr_Shiftright CaliforniaPosts: 44,408
    edited December 2012
    He says he does not drive in any abnormal way and just uses a car like everybody else---mixed city/freeway.

    He also says that Audi assured him a number of times that the car is completely within spec.

    I suggested that someone might be dropping the ball on inspecting this car's front end but he wasn't keen on hearing that, given that he's been assured so many times by Audi AND his mechanic.

    Aside from the aftermarket wheel angle (which was a very good alternative explanation) I can't see how suspension could NOT be involved.


  • obyoneobyone Posts: 8,065
    Hell, I use an old-school bubble balancer at home.

    On another interesting note...two nitro funny car owners differed when it came to balancing their tires which run up to 300 mph. John Force had a high speed balancer. Next to him was the Hawaiian Punch funny car. A quick peek revealed...guess what....a bubble balancer.
Sign In or Register to comment.