Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





2002 Jeep Liberty engine stalls

bobsram93bobsram93 Posts: 8
edited June 6 in Jeep

engine stalls feels like all cylinders not firing

Comments

  • cmhj2000cmhj2000 Posts: 188

    uh huh well what kind of jeep year ah some info could be helpful

  • steverstever YooperlandPosts: 40,209

    That info was in the tags, but I've added it to the discussion title.

    Moderator
    Need help navigating? stever@edmunds.com - or send a private message by clicking on my name.

  • bobsram93bobsram93 Posts: 8

    2002 jeep liberty 3.7 ran fine then felt like a engine miss pulled off road and it died.fault code p0505

  • steverstever YooperlandPosts: 40,209

    There's lots of posts around the net about this code on Jeeps and wiring issues with the PCM. If you can find it, check out the wiring. I'm not a mechanic though, and there's other things that could be triggering the code.

    Moderator
    Need help navigating? stever@edmunds.com - or send a private message by clicking on my name.

  • Mr_ShiftrightMr_Shiftright CaliforniaPosts: 44,619

    Book says it could be short in the IAC harness, could be the IAC motor, could be the PCM. Someone needs to disconnect these circuits and start measuring values and resistances in a step by step diagnostic procedure. At worst, you may have to hook up the Chrysler DRB scanner, start the engine and starting wiggling wires to see if something shows.

    MODERATOR

  • bobsram93bobsram93 Posts: 8

    My problem was broken valve seat.Had valve grind both heads all faults and problems gone

Sign In or Register to comment.