Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





Toyota Corolla Maintenance and Repair

1162163165167168188

Comments

  • imidazol97imidazol97 Crossroads of America: I70 & I75Posts: 18,046
    >Your public library probably has what you need to get started

    If you decide not to buy a factory authorized service manual, your public library may have access to AllData from their computers. I sometimes download the internet pages complete with pictures to my USB memory then plug it in at home and view the same things I saved, page by page.
  • terceltomterceltom Posts: 1,017
    I would suggest letting a tech. do it. I have an "86" Tercel that I had the axles replaced on already because of the torn CV boots. It much easier and cost effective to just get axles right away. Get the axles that are not original equipment. They are just as good as the originals and are gauranteed for as long as you own the vehicle. Even the OEM toyota axles don't come with that kind of warranty!
  • My wife has a 96' Toyota corolla. and when its cold outside it squeals. and when i turn hard it also squeals. is that a belt? :confuse:
  • terceltomterceltom Posts: 1,017
    Yes, it could be a loose or worn belt or possibly a bad tensioner. The tensioners were notoriously bad on the older Corollas. In fact there were a few recalls for them. The tensioner is the steel wheel that the belt rotates on that keeps tension on the belt so it don't slip.
  • great... lets get to work.... thanks.
  • I completely disagree with buying only OEM Toyota axles. I have bought several rebuilt axles over the years and they have held up just fine and have been completely trouble free. There is no need to buy an OEM product that cost 3 times the price and doesn't come with a lifetime warranty. Never have I once suffered from vibrations because of a rebuilt axle. Hell, I don't know anyone else that has experienced problems with rebuilt axles and to be honest that's all we have ever used for Toyota's and Honda's.
  • Mr_ShiftrightMr_Shiftright CaliforniaPosts: 44,408
    I think I specified not to buy rebuilt axles made in China. Sure, if you can find a reliable domestic or Japanese rebuilt unit, go for it. Also remember that this person wanted to do the job herself, and may not have access to the same sources you do---that's why I picked the easiest and safest ones for her---reputable junkyard or Toyota dealer. So I was specifically trying to advise a DIYer on this job, not you, who have vastly more experience. But thanks for bringing that up, that was also good advice.

    MODERATOR

  • The ignition in my 96' corolla acts like the steering wheel is locked, even when its not. It does it every time i try to start the car. Sometimes it takes me 5 minutes to get it to let me start the car. Do i need to replace the ignition?
  • You should try getting an original key cut first. I know I posted all this info before for someone else. However, briefly what's going on is that there are split waffers inside the ignition door and trunk locks. These split waffers start to wear and when they do they start to slip by on the worn key preventing the ignition from turning. Try an original cut key first. You can do this by a couple methods. Go to the dealer and see if they are still able to look up your cars key code by the vin number. Usually they can only go back 10 years but I have seen Toyota and Honda go back even further than the 10 years that we (Locksmiths) use as a rule of thumb. If they can provide you with the key code I highly recommend taking that code to a local locksmith over having the dealer cut the key. Several reasons why but the main is let the professionals do it right the first time and the professional is not the dealer when it comes to cutting original keys that is. If that doesn't fix your problem the Locksmith should be able to rebuild the ignition and make sure you ask him to leave out the 2 sets of split waffers found in the ignition. I do this automatically to prevent future problems but some may just put new ones in. I advise against this because they are the root of the problem and the only way to really prevent problems like these from happening again. Also, lubricate the ignition with WD-40, Tri-Flow, or LockSaver. DO NOT USE GRAPHITE ON ANYTHING LOCK RELATED!!!! If you need anymore assistance I will try to help you out the best I can. If you are located in the DC area I will be more than happy to fix your issues as well.
  • To be honest I have never paid any attention to where the axles were rebuilt. Something I have never seemed to worry about especially when it's something you need in a pinch on a Sunday and pretty much everything else around is closed. Everything is made in china now. Even the Japanese companies are outsourcing the once Made in Japan products. It's China, Taiwan, or Malaysia for almost everything unless you are buying higher end products which are still made there.
  • Does this technique apply to the door locks too? the passenger side door wont unlock with the use of the key?
  • geodrivegeodrive Posts: 20
    Hi,
    I have corolla 09 on lease. If I opt for private car servicing from Mr Lube or something...instead of getting it done from Toyota service centre, then does it effect the warranty of my car in any sense ?
  • No you don't have to take the car to Toyota to keep your warranty. You can go anywhere or even do it yourself. Just keep your receipts from wherever you go or from where you purchased the parts if you decide to do the service yourself. Note it in the owners manual as well (there is a section for logging your services).
  • geodrivegeodrive Posts: 20
    Thanks for the clarrification man....
    Can you suggest some good places apart from Mr Lube. Also is it only oil change after 8000Km for 1st service or anything else is also to be taken care of ?
    My car is not giving any problems as such...
  • What is the recommended oil change frequency for a 2010 corolla?
  • On all my cars I try to change the oil at 3k miles. Some will say it's overkill some will agree. Either way I wouldn't go over 5k on regular or dino oils. Don't use fram filters and you should be good. I'd highly recommend 3 months 3k mile oil changes on Toyota's though as they have a history of oil sludge problems and frequent oil changes are a sure fire way to help prevent them.
  • terceltomterceltom Posts: 1,017
    It's in your manual as well as the other maintenance issues you should be paying attention to.
  • mnfmnf Posts: 404
    7500 miles is what Toyota says on Synth oil ( Mobil 1 ) as far as sludge there has been no issues for years.

    MNF
  • Cool! I was hoping that was the case. That is the same as my Accord!

    Thanks a lot!
  • Hello I just purchased a 1993 toyota corolla manual 5speed. It runs great, but when I first start it up it idles so low the car begins to shake a little bit then it shuts off. It seems that if i give it a few RPM'S for about 1 minute or drive it for a while then it goes away. There has been fresh gas put in the tank but im guessing that maybe since the car was sitting in the impound lot for about 6 months that maybe I need to put an additive in the tank to clean the injectors. Does anyone think that It could be something else maybe serious.
Sign In or Register to comment.