Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





Subaru B9 Tribeca (B9X)

1267268270272273407

Comments

  • x5killerx5killer Posts: 368
    I knew of an outfit called OEM rims i think that would chrome factory wheels but i think you had to send them back your non chromed wheels when they sent you the chromed factory wheels.

    I know you can usually get the center cap chromed separately as well which is what I wanted to do to add a little interest and since full chrome wheels would not be good for Philadelphia area winters and it even says that on oemrims.com site. So I figured just the center cap would be fine and wouldn't get as messed up but even with those I might want to have a spare set of non chromed ones for really bad snow/salt.

    either way they never got back to me on getting some chromed factory center caps for the Tribeca and now its probably too late in the summer to be worth it. I may still get them though again as long as i cna keep my non chromed center caps.

    I feel like just the chromed center cap will go fine with the rest of the non chromed wheel and will get rid of the of the blue of the subie logo on the center cap as it will stil be there but all chrome.. no blue.

    we'll see. I guess noone here got chromed factory wheels yet?
  • x5killerx5killer Posts: 368
    so you are a 14 pump chump. Beca likes you to give it to her at least 20 times before she stops chiming. don't be a captain quick nut.
  • cluelesspacluelesspa Posts: 648
    OK well got my B9 back with the accessories mounted. I have two questions:

    1. Aero Rails - does the rails move up and down the roof line? it looks like there are rails that it could slide along on the roof. My Pacifica had full rails that you could move the cross bars forward or backward along the roof.

    2. Tow Hitch - did they really put a Class 1 size tow hitch on the B9! I was shocked that they put a car sized tow hitch instead of the Class 3 hitch I had on my Pacifica and Jeep uses on theirs. not sure whats on the MDX or others. My question is what is the Rating on a Class 1 Hitch? with the oil cooler you should be able to tow 3500 lbs.. correct? but I thought a class 1 Hitch is not rated for 3500. the standard rating is 2000 lbs with no oil cooler.
  • morey000morey000 Posts: 320
    I spoke with two separate salesmen regarding whether the roof rails move. They both independently told me that they were nearly positive that they did not move. These guys were pretty knowledgable about the vehicle, and both had been with this dealer for many years- so they weren't your normal inexperienced salesmen.

    So- things don't look good regarding movable rails. Looks like they're fixed to the spot. It sure seems like they would be able to move tho'.

    don't know about your trailer hitch question.
  • movedormovedor Posts: 65
    Thanks for the pictures subienewbie2. That gives me a good idea how it looks with a bike mount in place.

    How discrete is the hitch mount when the bike rack is not attached?
    How's the cutout finish at the bumper for the hitch? Is the gap between the hitch and the cutout apparent?
  • movedormovedor Posts: 65
    I'm Tribeca comparing against Murano and Pilot.

    In my opinion Pilot has much better visibility. But the interior doesn't look good.

    The Murano has the same visibility problem as the Tribeca (if not worst) and a unattractive console and gauges, but it has memory seats and better gas mileage, things I see as important.

    Reverselogic device seems interesting, especially because it is hidden behind the bumper cover. However I found a short post elsewhere stating it only works if the car is in movement at least 1/4 mph because of the doppler effect. I think a sonar is more reliable, but it is visible and requires drilling the bumper.
  • kmartinkmartin Posts: 427
    Jerry, I was told $99 (retail) but I have seen them somewhere for $75 (one of the discount parts places). Installation was supposed to be 45 minutes' labor, but the puddle light complicated the tech's efforts. He wasn't sure if their was an issue with the puddle light wiring, so he pulled all of the fenders just in case...plus the fact that the tech had a very bad attitude that day and literally hung up on the young service manager....I complained to the head SM and ended up paying no labor...long story short, it cost me $99 total.

    Keep at the seat belt thing...I'm not sure what to tell you, but it must be something obvious you are not quite doing...it DOES work, and I can usually do it on the first try. I'm sure it's my directions that are confusing...others ahhavelso initially had problems but most seem to get it to work eventually (and the peace and quiet is well worth the efforts, IMHO!!!).

    -Karen in AZ-
  • kmartinkmartin Posts: 427
    I inherited my father's nose, and even he admits it's not good...quite long and sharp. But I am also told I look like my mom on occasion, so that's a good thing :-)

    So when you select a color for your Tribeca, is that calling "picking" your nose?

    :-)

    -Karen-
  • kmartinkmartin Posts: 427
    I agree with other posters that initially this was an issue, but I am getting used to it. I find myself much more conscious of my surroundings as well as where the neighbor's kids are BEFORE I put the car in gear. Maybe this is a good lesson for all of us, as I took much of this for granted before. Still, all it takes is one lapse of judgment... The rear sensors make a lot of sense (no pun intended)...many luxury cars have them pre-installed.

    -Karen in AZ-
  • kmartinkmartin Posts: 427
    note the factory hitch includes an oil cooler to increase the tow rating...

    I have seen the factory hitch listed seseparatelyrom the oil cooler on some web sites. So if you just want it for the bike hitch rack, this would save you some $$$.

    I have a hitch rack, and it is great. No way could I lift my bike to the roof, even on the Forester I originally owned. Mine is a Subaru rack from about 5 or 6 years ago, and it has a release to allow you to drop the whole rack down and have access to the rear hatch without actually removing the bike(s).

    -Karen in AZ-
  • kmartinkmartin Posts: 427
    There are specific slots in the rails that the crossbars must fit in...has something to so with the placement of the moon roof. So, no, there is no adjusting of the crossbars inon the Tribeca.

    -Karne-
  • photoguy2photoguy2 Posts: 164
    So when you select a color for your Tribeca, is that calling "picking" your nose?

    Ummm, YES! Good one Karen!
  • c_hunterc_hunter Posts: 4,487
    That's one of the bad things about those racks, and it makes them nearly useless -- very narrow crossbar spacing means no long loads like canoes, lumber, etc... I had to mentally cross the Tribeca off my list after seeing that (not that I was actually making a list!).

    Craig
  • megreyhairmegreyhair Posts: 154
    The roof rail does NOT move. I will double check when I get my B9 this weekend. If I remember correctly, the rails are screw into the roof. I remember not seeing any tracks the rail could slide forward/backward on.....

    Forgot the rating on hitch...
  • I am pretty shure the factory 11/2 inch receiver on the beca is a Class II with a capacity of 3500 pounds if the tranny cooler is installed.
  • Here is a tight shot of the hitch.

    The install is very clean, does not protrude & looks like a factory install

    http://i16.photobucket.com/albums/b4/subienewbie2/IMG_0217.jpg
  • ateixeiraateixeira Posts: 72,587
    Looks great, perfectly integrated. Very clean.

    -juice
  • cluelesspacluelesspa Posts: 648
    Thanks everyone on the response. I did find a bag of little plastic pieces in my rear hatch area from the tech. I guess it covered the holes where the roof aero rail supports were installed. Bummer on the roof aero rails. just thought the track was hidden in the roof line.

    the trailer hitch is small type typically you find on a car tow package not an SUV. I didnt know there was a class 2 in hitches. but found this site:
    Tow Hitch Info the nice thing about class 3 is the increase from 200 lb to 500 lb tongue rating. its not always the total weight your pulling that counts. Also the 4 wire flat connector lose fitting is not as nice as all the other vehicles I have seen. the best is the round small 7 plug on explorers which are permanently mounted in the tow hitch bracket next to the hitch receiver. looks better then the wire and plug hanging lose.
  • jerrys2jerrys2 Posts: 181
    Karen your directions were perfect, once I followed them it worked fine! I am so happy I am going to let the DRL burn for a while. Next "project" is to get the splash guards. Thanks for your help.

    Jerry :)
  • aixaix Posts: 30
    I just debadged the rear trunk lid of the Subaru and B9 Tribeca lettering. I must say, that the rear is much cleaner looking without it. Anyone perform any mods to their Tribeca yet, either cosmetic or performance-wise? I know we're talking first model year here. Doesn't seem to be much out there.

    My next mod...baby car seat. Is anyone putting the baby car seat in the middle? I know that generally this is considered the safest spot. But the Subaru manual doesn't recommend the center seat for some reason, perhaps due to the seat belt system for that particular center seat? Any thoughts here? Thanks... :P
Sign In or Register to comment.