Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





Ford Mustang (2005 & newer) Problems and Solutions

1272830323374

Comments

  • I remember reading that copy-protected discs are becoming more and more common. I also recall reading that because of the protection scheme, users may experience some troubles. I personally have never experienced this, but have read about users that have. Could this possibly be at work here and not the head unit? I don't like Coldplay so I don't have the disc but I do know they are very popular and would want to protect their music. Maybe this disc is using a new protection scheme that is interfering with the firmware in the head unit. Just my first thoughts on this.
  • graphicguygraphicguy SW OhioPosts: 7,092
    I've got the "B" spec Shaker 500. It's probably one of the first ones they used in production vehicles since mine was built in March.

    What the difference is between it an "A" spec, I have no clue.

    I have heard of the "copy protection" schemes on some of the new discs that keep people from posting songs on "share sites". I don't know that you can know for certain which discs would or would not have this copy protection scheme.

    Sounds plausible, though.
  • cmnottcmnott Posts: 200
    Maybe the CD senses that the Shaker 500 has MP3 ability? Is that what you are getting at?

    I tried it in a base Mustang V6, not a Shaker, and it workerd...maybe it is the MP3 player that screws with the CD?
  • I'm not sure if this information will help with your problem, but here goes....

    I have a Shaker 500 and I have played burned mp3 disks in my radio. It doesn't like some of the disks, but it usually plays them. When a mp3 disk is playing it will display D1 F1, etc. That means, Disk 1, Folder 1 and then it will have the track number. I can't tell you about cold play, because I don't listen to them.
  • I have a 05 convert mustang that has a irratating squeak that comes from either the drivers side dash or door. It only makes a noise when I'm on a bumpy road. The road doesn't have to be in bad shape for this to happen. Sound familiar to anybody ??? Thanks for the help.
  • cmnottcmnott Posts: 200
    I wonder why the Shaker 500 thinks that my store bought CD is an MP3 disc?

    It is pretty pathetic that no one at my Ford dealer knows what D1 F1 means except you.
  • My 05GT dash rattles and squeaks since day one. Different places on different days, totally random and I credit it to just poor quality / design. I brought it in and drove with the service manager and he played deaf and then told me even BMWs have squeaking dash boards. Just on the way to work today I got a new loud rattle and I'm seriously considering selling the piece of Sh_t - if I can .
  • I've had the same rattle in the right rear quarter. Originally, I thought it was coming from the rear seat, then the dealer said it was from the jack in the trunk. However, even after wrapping the jack and going over the rear sear with a fine tooth comb, I still have the rattle. It almost sounds like it's coming from the right rear wheel well area, but it's hard to tell. BTW, I have the Shaker 1000 with the monstrous speaker thing in the trunk, but the dealer says that's not the source of the noise. Can anyone help?
  • yes had some kind of egg shaped mess all over my pretty torch red 06 gt i saw it after the dealer cleaned it up for me and my final inspection. they ended up using some compound and buffing and got out most of it i couldnt see repainting a new car i hope i didnt mess up
  • don't know which section to put my messages in, so here goes. have had stang since jan. 05 and had trans replaced, still have problems with new one. ring and pinon gears replaced in rear end to stop howling. didn't help. but it did cause a new vibration when slowing down. also had to have gas tank replaced, wouldn't fill. they say that is a vendor problem. had left side door window replaced four times before i got one without any flaws. they replaced a flange to try to stop vibration from rear end gears. also the all floor position on the heater not working. they have a tsb on this problem but no fix since i bought the car. fse coming to take 2nd look at problems that cant seem to be fixed. i have asked for a replacement car with an auto trans, which i will pay the difference for but they expect me to trade my car in as a used one and pay msrp for the new one. they have had my car for over 30 days for all these problems but still no help from ford on a buy back/trade out. also has a lot of noise when loading and unloading clutch. car also gets lousy gas mileage. i could go on but dont want to take some one else's space.
  • tayl0rdtayl0rd Posts: 1,938
    I have to admit I was a bit skeptical about those washers fixing my vibration problem, especially since they are wafer thin. BUT, I took them off yesterday and, viola', vibration completely eradicated! It drives just as well as it did with the stock wheels! In fact, it was so smooth that I had completely forgotten about the vibration.

    I examined my stock wheels and my new ones and figured out what the problem is. The stock wheel holes are drilled so that those washers will fit inside the holes and the wheel will still lay flush against the brake rotor. Aftermarket wheels have a flat mounting face that needs to be flush against the rotor. As wafer thin as those washers are, they were preventing the wheels from mounting flush. This, in turn, caused a wobble in the wheels which translated to a vibration in the steering wheel (and your butt). Now that I've removed those washers, I'm happy with the ride again.

    One correction as to what you recall the young tech told you. The washers have nothing to do with keeping the stock wheels from damaging the brakes. What they do is hold the rotor snug on the hub. They prevent the rotor from wobbling around when the caliper squeezes it. That wobbling promotes rotor warpage. We'll have to keep in touch to see how each others rotors (and pads) wear.

    Now if I can get that occasional rattle on the passenger side dash gone, it'll be perfect again. I see that you said it's a metal bracket behind the airbag. It doesn't sound like a metallic rattle to me, but who knows. I have them check it out eventually.
  • tayl0rdtayl0rd Posts: 1,938
    Wow! Talk about a dealer give you the runaround! You need to take them to court and also try to put the Lemon Law in motion. There is a TSB for the gas tank problem. Nearly every '05 Mustang has it and a lot of us have had it fixed already.

    Sorry to hear about your troubles. Good luck!
  • Hey I just Passed By A brand new 06 on the lot and I Bought A 05 at the end of feb. whats the diff between the 2 ?? are the 06 better ? I would think the 05 is better being that it was the first year of these new body styles ?
  • Wrong forum as this is not a problem but I'll answer anyway....

    If it is a GT no changes.

    If it is a V6, the Pony Package is new. Do a search in the Ford Mustang 2005+ forum for the details.

    All models get two new colors, Tungsten Grey and Vista Blue. Sonic blue discontinued. There is also new wheel options, most of which yuo can see at www.fordracingparts.com
  • graphicguygraphicguy SW OhioPosts: 7,092
    First, it sounds like your dealer's service dept isn't very good. I'd take it to another dealer.

    If issues persist, as taylord mentioned, I'd invoke lemon law. Make sure you've got all your paperwork for the service visits. This is not an easy, nor a quick process. But, if you can't get your issues resolved, it may be the only alternative. In the back of your owner's manual packet, there are instructions on how to proceed with lemon procedures. Don't wait for Ford to instigate the procedures, because they likely won't.

    Fuel economy estimates are exactly that....ESTIMATES. Testing isn't done by Ford but the EPA. They are the ones who post the numbers on the MSRP sticker. So many variables go into MPG numbers (like driving conditions, quality of gas, personal driving habits, etc), it's hard to duplicate EPA MPG figures, on any car.

    TSBs for the slow fuel fill were issued for those "early run" cars. Dealers should be able to get the fix done when parts are available.

    What kind of noises are you experiencing with the clutch?
  • I had the same problem with My 05 Roush mustang. It was parked in a parking lot with a incline when I came out car rolled back against rear bumper of another car behind. I found that if you were driving car hard and you put on parking brake while rotors were quite hot they held at first. As the rotors cooled the ebrake did not hold al though it holds while they are hot. Try it you will se that the ebrake handle has to pulled some more to hold it. I think the rotors maybe shrink in size maybe when they cool. No dammage to either vehicle expect for a small nick in my bumperimage
  • The brake squeel noise is not from the pads against the rotor but from the back metal side of the pad against the two sides of caliper. When you wash vehicle rust devlopes between the steel back side of brake pad and caliper. When the squeak use WD forty with a little squirt in between where pads contact claiper but not where the pads meet the rotor and squeak is gone. It is just as simple as that.
  • Any one notice their hood lifting up at high speed in the middle?? First time I saw it i stopped i thought the hood was not latched but it was. Hood seems to weak in the middle. I've talked to other 05 owners and they noticed that also. More prevalanet when driving into a wind.
  • dupes01dupes01 Posts: 13
    Hello,
    I live in southern ontario, and will need to drive my 05 GT in the winter. Has anybody heard about steel wheels fitting on 05 GTs? Has anybody thought about driving in the winter and come up with a solution?

    On tirerack.com there are winter tires available, Michelin X-ice, for the stock 17inch rims for about 125US a piece. Expensive. But if there were cheaper tires to fit on steel rims that would be the way to go. Any thoughts or experience out there?
  • Yes, my hood flops around like a fish out of water at anything above 80mph or when a BIG vehicle goes the other direction on a 2-lane highway. Complained at Ford, and was told they all do that. You know the hoods are PLASTIC on these cars. This car is so FANTISTIC otherwise, I don't notice it anymore
This discussion has been closed.