Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





Lost? Ask a Host for Help!

17980828485138

Comments

  • I have been trying to locate a repair manual for Mark VIII. There does not seem to be anything specifically for this model.
  • PF_FlyerPF_Flyer Pennsylvania Furnace, PAPosts: 5,854
    Try posting this question in the Toyota Highlander Hybrid Engine Questions discussion. The HH owners posting there should be able to give you a hand.

    MODERATOR
    Need help navigating? pf_flyer@edmunds.com - or send a private message by clicking on my name.
    Share your vehicle reviews

  • PF_FlyerPF_Flyer Pennsylvania Furnace, PAPosts: 5,854
    Try asking on the Owners Manuals discussion. Shoudl be able to get some suggestions on where to find one there.

    MODERATOR
    Need help navigating? pf_flyer@edmunds.com - or send a private message by clicking on my name.
    Share your vehicle reviews

  • a couple of nights ago the headlights went off and wont turn on. its a pull switch. the tail lights and back blinkers work, but the front blinkers and lights wont. help.
  • steverstever YooperlandPosts: 39,936

    Moderator
    Need help navigating? stever@edmunds.com - or send a private message by clicking on my name.

  • I am having trouble finding information on the O-rings used on the high and low pressure pipe at the evaporator. I went to an auto parts store and ordered an O-ring set for the A\C system, when I picked up the O-ring set there wasn't any information on which O-rings went where. I bought a Chilton's book but that was a dead end. I disconnected the high & low pipes and found what looks like a wiper instead of a O-ring. I replaced the so called wiper with the identical part in the new O-ring set but it did't hold pressure. I am at a lose as what to do, Please help.
  • steverstever YooperlandPosts: 39,936
    I don't see an active L-Series repair discussion; try asking in Climate Control Problems (Air Conditioning, Heat) - All Cars.

    Moderator
    Need help navigating? stever@edmunds.com - or send a private message by clicking on my name.

  • I am unable to find the command to start a new discussion. I always have to post as a reply. Am I missing something? I have a very specific question about a Subaru and ended up posting it in the "Subaru Crew" topic as a reply because it has the most views...

    Thanks,
    Ben
  • PF_FlyerPF_Flyer Pennsylvania Furnace, PAPosts: 5,854
    What you want to do is scan the discussion list to find the most appropriate discussion for your question so that you're asking it where that issue is being discussed.

    If you're looking for help with a specific problem, the Search Forums and Advanced search in the left sidebar can help you home in on things. For example, searching for "outback stalling" in the advanced search would get you to posts about that specific issue. Give it a shot!

    MODERATOR
    Need help navigating? pf_flyer@edmunds.com - or send a private message by clicking on my name.
    Share your vehicle reviews

  • What's up with all the photos we posted? All I get is the error, "this page cannot be whatever". :confuse:
  • Hi,
    I have a 2000 grand cherokee ltd with 4.7L v8. 4WD 94,000 miles. Over the past several months we have had recurring problems with it running very rough and sometimes cutting off. Here is the history.
    About 2 years ago replaced the fuel pump and filter.
    Recently started rough idle, up and down rpm when idling, whole car rocks side to side, sometimes cuts off. Also tends to have a hard shift from transmission from time to time.
    Took to mechanic - did fuel injector and throttle body cleaning and replaced spark plugs. Ran great a few days and problem returned.
    Took back to mechanic and he redid fuel injector and throttle body cleaning. Worked fine another week or two and problem started again.
    Took back to mechanic and he replaced the throttle control sensor. This worked for about 2 weeks. Then problem started again.
    This time took to Jeep Dealer. They replaced purge solenoid. This worked for about 1 month and problem has started again.
    :mad:
    Any ideas?

    I hate to keep dumping money into the jeep. It also needs front and rear pinion seals, transmission adapter seals, and cv boots. Need to decide to spend a little more to fix or trade it.
  • PF_FlyerPF_Flyer Pennsylvania Furnace, PAPosts: 5,854
    Sounds like you need to post in the Jeep Grand Cherokee quits intermittently discussion

    MODERATOR
    Need help navigating? pf_flyer@edmunds.com - or send a private message by clicking on my name.
    Share your vehicle reviews

  • steverstever YooperlandPosts: 39,936
    There's been some server glitches today so that's probably why some photos aren't showing up for you.

    Moderator
    Need help navigating? stever@edmunds.com - or send a private message by clicking on my name.

  • I recently replaced the brake master cylinder on my 95 Ford Aerostar. Now the power assist doesn't work. Any idea what I missed when I put the new one in?
  • patpat Posts: 10,421
    One of the discussions in the Aerostar group should be a good place to ask. The general brake issues discussion in Maintenance & Repair might be helpful as well.
  • HELP! i am tired of not knowing what the mechanic is saying to me or if he's ripping me off. is there any book out there that will fill me in on the basics of a 2001 nissan pathfinder? or a class i could take to not feel so foolish? :confuse:
    thanks
  • PF_FlyerPF_Flyer Pennsylvania Furnace, PAPosts: 5,854
    Best place to start would be to head to the Nissan Pathfinder Group and start picking the brains of the Pathfinder owners discussing their vehicles there.

    MODERATOR
    Need help navigating? pf_flyer@edmunds.com - or send a private message by clicking on my name.
    Share your vehicle reviews

  • steverstever YooperlandPosts: 39,936

    Moderator
    Need help navigating? stever@edmunds.com - or send a private message by clicking on my name.

  • Does this tool exist: Where I can put in the maximum price I can afford to pay for used vehicle and the tool tells me what used vehicles sell at that price (private party or dealership).

    I think that would end up offering me choices I never might have thought of otherwise and give me a sense of what I can shop for.

    Thanks for any help.
  • steverstever YooperlandPosts: 39,936
    If you go to the Used Car link at Edmunds.com, the first thing you'll see at the top is a Find Your Next Car link.

    It'll ask for a brand and zip code, but once you click through there's a place to put the price range you are interested in and it won't limit your search by make or model (unless you enter something in those search fields). It's through AutoTrader, an Edmunds partner.

    Once you decide on a car, check out the Prices Paid: Buying & Leasing Experiences board for real world deals.

    Moderator
    Need help navigating? stever@edmunds.com - or send a private message by clicking on my name.

Sign In or Register to comment.