Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





Jeep Wrangler

14414424444464471137

Comments

  • tsjaytsjay Posts: 4,591
    For your Jeep:

    Happy Birthday to you, Happy Birthday to you, Happy Birthday dear _____, Happy Birthday to you.

    Come on, Pete, NAME that Jeep! Geez!

    Hey, you da man I need to talk to. I have been wanting to go to 33 x 10.50 BFG Muds, but I know I would get a bad rub on my flares if I did that. I am already getting a light rub at full stuff on my 31 x 10.50's, so I know I would have to make some kind of compensation for 33 x 10.50's.

    You apparently disconnect your front sway bar, since you mention quick disco's in you list of mods. So, how do you keep from rubbing your flares in extreme flex situations? You don't mention bump stop extensions. Did you install some?

    We are both at 2" of lift, mine being Procomp springs, yours being spring spacers. We both disconnect the sway bar. Do you get some rub with those 33s???

    I have AR767 wheels with 4" backspacing, and my tires DO stuff inside the flares when they are pointed straight ahead, but when I turn just a little bit when fully stuffed, I get some rub.

    Maybe you do get some rub and just don't worry about it????

    Fill me in, Pete.

    Ain't these Jeeps the coolest things in the world? I sure wish I had the scenery you get to enjoy when you go off road!

    Tom

    Have you hugged your Jeep today?
  • tsjaytsjay Posts: 4,591
    Gosh, Kevin, you must be just like I used to be: trading cars all the time. Thelma Jane cured me of that, though.

    Tom

    Have you hugged your Jeep today?
  • tsjaytsjay Posts: 4,591
    Did ya go to Freehold Jeep, and did ya find out what happened?

    The suspense is killing me!

    Tom

    Have you hugged your Jeep today?
  • surfer454surfer454 Posts: 26
    I finally got in contact with the sale mgr (actually he contacted me). He has located some vehicles for me. I'll talk to him today at lunch. I have not decided if I even want to give them another chance. Perhaps I should just close the door on them and work with a different dealer.

    The sales mgr claims that the factory is shut down for '03 orders and that is why my vehicle was cancelled.

    More to come......
  • 01r101r1 Posts: 280
    Tom-

    I don't get much rub from the 33's, but I haven't had full suspension travel until just now. I got a little rub from the rear tires at full stuff, very minimal, only on the inside wheel-well plastic liner - not the flares. I ran 1.25" wheel spacers at first in the rear and the tire would just start to hit the flares at full stuff. I took the rear wheel spacers out because I didn't want to add extra leveraged stress to my D35. The tires come close to hitting the rear spring perch, but don't, so I'm happy. I just added some rear bump stop spacers above the metal 'bell' bump stop holder, have yet to test if I still rub.

    As for the front, the only rub I get has been at full turn, the compressed side will hit the sway bar. It was real noticeable at first, before I used the 1.25" aluminum wheel spacers, now it's a gentle rub only under max compression. Since it only happens at full crank under compression, it's no big deal and there's no signs of wear on the tires.

    I just upped to the Old Man Emu shocks this week and haven't tested anything under full flex yet. This may yield different rub points. The stock shocks where a big limiting factor for how much droop the front suspension had and may have affected the other side's compression too. I was never able to flex the front like your pictures showed Thelma Jane doing, my shocks just weren't long enough.

    Within the next week I should be able fully test this configuration and let you know. I will make a point of taking pictures to show the rub.

    Other than that, I've enjoyed having 33x10.50's. The extra ground clearance has paid off time and time again.

    I forgot to mention on my earlier post about another mod, Rock Bars/Side Step from Turbo City, these are some seriously heavy duty rails that you can lift the Jeep from.

    I'll update later,
    Pete
  • tsjaytsjay Posts: 4,591
    Well, CRAP! If they had placed your order the day you made the deal, instead of waiting two weeks, maybe your order would have been ahead of the cut-off date. Also, I'll bet ya that even on May 26th, the day they actually entered your order, the order was still OK. There's something they are not telling you. Why would the DC system have accepted your order in the first place, if the deadline had passed??? DC told you that you had a valid order, but that it got canceled, right?

    Oh well, it probably IS too late now to order an 03.

    Keep us posted, Bill. Good luck.

    Tom

    Have you hugged your Jeep today?
  • tsjaytsjay Posts: 4,591
    Thanks for the info! I will definitely be interested in hearing how things turn out with the latest changes, the OME shocks and all.

    I never had a problem with rubbing on the inside, since I have the 4" backspacing on the AR767s. My problem has been rubbing the flares.

    Tom

    Have you hugged your Jeep today?
  • kelleyokelleyo Posts: 182
    I finally got Pepe' back. Crank Position Sensor went out and the engine intermittantly would quit as I was driving! Pretty scary...

    Not under warranty. Cost $290. OUCH.

    Here is the worst part. While at the dealer my Jeep (along with some others) was broken into. Stole my new Stereo including the Amplifier. Tore up the Dash. Broke out the Drivers side Glass (I have full doors). Why they did not just unzip the top I will never know. Also destroyed the latches on my golve compartment and center console.

    Took a while for them to get all of the parts in to fix it back up.

    Since most dealers have a waiver that they are not responsible for stolen items I was happy they replaced everything for free. One thing I will stop doing is storing my Alpine face plate in
    the center console....

    I will say that the engine has never been so smooth. I think I was having misfires and such from day one with the CPS going bad (it was bent or something). I must have just thought it was the way Jeeps were but now I realize I must have been having symptoms all along and not realizing it.
  • tsjaytsjay Posts: 4,591
    Man, what a bummer! Is everything fixed to your satisfaction? The damage from the break-in, I mean?

    I can't imagine going two weeks without my Thelma Jane!

    Tom

    Have you hugged your Jeep today?
  • barresa62barresa62 Posts: 1,379
    I found a fairly secret place for my Alpine faceplate when I have to keep it in the Jeep. Lift up the passenger sit. There is a perfect spot just in front of the jack assembly. Someone would really have to know what they were looking for to find it. Also, in a black interior the faceplate isn't easy to see with a quick look or glance.

    Stephen
  • kelleyokelleyo Posts: 182
    how they fixed up ol pepe'.

    I agree that there are good hidey holes in the wrangler if you just think about it...
  • rhighrhigh Posts: 6
    Has anyone modify the seats in the 2003 wrangler to the same height as the 2002 and older. Really enjoyed the height of the 02 and older jeeps seats.
  • twylietwylie Posts: 619
    there is a guy I've seen on JU that sells them. Apparently you can get 1" or 2" seat riser kits. Really not much to it. You could build your own, but for $25 you can get a complete kit and not have to hunt down all the parts. Hope it's ok if I post this here:

    This thread has his contact info:

    http://jeepsunlimited.com/forums/showthread.php?s=&threadid=3- 76644&highlight=seat+spacers

    -twylie
  • boredbored Posts: 300
    Tom, Trey, Larry, and others...

    A public auto auction just opened up about 6 miles away from me. They had several Jeeps out there... from CJs (I think) to YJs to TJs... maybe there is hope for my Jeep still!

    Thanks, for the positive advice, everyone!

    Hug your Jeeps for me! :-) (O|||||||O)

    Marlon
  • tsjaytsjay Posts: 4,591
    Anything to report? Sure am rootin' for ya to get a really good Jeep and a great deal.

    How 'bout an update?

    Tom

    Have you hugged your Jeep today?
  • tsjaytsjay Posts: 4,591
    That's cool. You'll get your Jeep sooner or later. Just keep following that dream.

    At least you are smart enough at 15 years of age to know how cool Jeeps are. Shoot, I was 51 before getting my Jeep! So, you are WAY ahead of me just by wanting a Jeep at your age.

    Tom

    Have you hugged your Jeep today?
  • My YJ's right rear brake line has a 1/4" groove worn into it where it rubs against the chassis frame about 12" from the brake drum. Thought it might be just my jeep but I've snuck a peak at
    4-5 other parked YJs and they all have the same wear patterns to one degree or another. Guess I oughtta just replace the brake line but I wonder if any other YJ owners could weigh in w/ opinions.
  • mac24mac24 Posts: 3,910
    If it were mine I'd certainly replace the line. Maybe consider a stainless braided one? Otherwise, I'd take a short length of hose with the same i/d as the o/d of the brake line. Slit it length-ways, then slip it over the brake line in the area of the rubbing and secure it with zip ties.
  • tsjaytsjay Posts: 4,591
    Hey, Jeep Buds, Gill's site is back in business. It was down yesterday and earlier today, but it is working now. There was some kind of change in the phone line or something that had Gill down for a while.

    Tom

    Have you hugged your Jeep today?
  • tsjaytsjay Posts: 4,591
    For itsajeep, try leaving out the www, if you can't get the home page to open using the www.

    Tom

    Have you hugged your Jeep today?
Sign In or Register to comment.