Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Isuzu Trooper



  • serranoserrano Posts: 107
    I just noticed that we have a "boxtrooper" here on the board as well as an "apexcutter." If you combine them, you get "boxcutter." Are these Trooper aficionados really terrorists that are here incognito?

  • paisanpaisan Posts: 21,181
    If I were a terrorist, I know I'd be driving a trooper, you need real reliable vehicles when traversing the dessert and on "mission" critical applications...

    Imagine a terrorist driving an Envoy/Trailblazer? They'd be on their way to bomb something and wind up being late cause they had to stop and "reboot" the car!

    PS: Not trying to trivialize Terrorism or anything, I know all too well how serious it is (works <5 blocks from WTC)
  • Hypothetically,
     I think the Trailblazer/Envoy would make an great bomb.
      Loose parts = More shrapnel.

    P.S. On a serious note, Let's pray for a successful mission and the safe return of our troops in the gulf!!
  • jrr2kjrr2k Posts: 35
    Amen to that LDY.

    I get what you are saying boxtrooper. I'd love to see photos of the finished product. Those Thule bars ain't cheap either!
    Well I keep workin and saving, in the end I'll probably go with the overlander 50x60 rack. I would like a rack basket for baby strollers, baby jogger stroller, baby bike trailers and also light dirty gear. I hope I can fit the Yakima snowboard component to the overlander rack and I hope the snowboard will fit inside the overlander frame. A side mounted ski carrier might also work. I will carry the bikes from the trailer hitch.
    I sure wish Troopers had a stock rack!
    I will let you all know how it turns out soon.
  • troop2shostroop2shos Posts: 235
    For general interest, a friend just called to advise that he survived his 4600 mile trip out to the West Coast in his '00 2wd Troop. While on I-80 in WY, he hit some wood pallets in the passing lane at 80+ at night. He advised that his new left front tire went down immediately with a sidewall gash that he could put his fingers through with little resistance - but his Troop never swayed nor deviated from his direct path to the road shoulder...adding that "I really like this truck!!!" There was no additional damage from hitting the debris. This was after he narrowly missed hitting a heard of deer & 1 large bull moose the day before. He also reported that his average MPG was 18.2 overall for the entire trip.
  • sbcookesbcooke Posts: 2,297
    Whenever a new person in my trucks asks me..."aren't these the SUVs that flip over?"...I always tell them "I have only had it up on 2 wheels twice...that was only on the highway though."
  • steverstever YooperlandPosts: 39,993
    "In North America, Isuzu will expand its successful diesel engine business while shrinking its exposure to SUVs, where competition has heated up through the use of heavy incentives."

    Isuzu banks on China, Asia for revival (Autonews)

    Steve, Host

    Need help navigating? - or send a private message by clicking on my name.

  • ricksrlricksrl Posts: 17
    I made my Rack from Overland brackets and Yakima parts. Instructions are on the site. Very happy with it, sturdy and functional. I'm thinking about adding a third bar to carry a canoe. If anyone has done this, or would like to split the parts up, as they all come in sets of two, please let me know.
    As to the flat tire story.
    I was doing about 75mph on I-70 west of Glenwood Springs,CO passing a RV when the left rear tire blew.
    After I rolled to a stop, there was little left of the sidewall. The Trooper behaved beautifully, very stable.
  • paisanpaisan Posts: 21,181
    Hey guys, picked up my ARB Bumper today. Gonna try to put it on on saturday. Hopefully it's a smooth install.

  • sbcookesbcooke Posts: 2,297
    I made multiple trips to a sears hardware store during my install...If you need additional bolts and such, I recommend getting several lengths and a lot of washers to not have to go back...I also tried to use all grade 8 bolts...which I believe most metric sizes are by default, but keep that in mind because you probably don't want to put grade 3 on.

    Good Luck! and post pics.
  • paisanpaisan Posts: 21,181
    Luckily for me the hardware store is close by.

    When you did yours, did it have these metal bars that had to be attached? I have the "wide-body" one which I think came out in '01 for australia.

  • sbcookesbcooke Posts: 2,297
    I am not sure what you mean by Metal Bars? I had 3 main pieces. The two that mount/bolt onto the frame and then the bull bar itself which mounts/bolts to those.

    This is what I am talking about.
  • paisanpaisan Posts: 21,181
    That's what I was referring to. It's got 2 mounting brackets and the bumper itself.

    How did you wire in the turn signals? I haven't looked into that as of yet. I'm contemplating finding some slim fog lights to fit in there or connecting the turn signals to the parking lights.

  • paisanpaisan Posts: 21,181

    Shows a case of Yeungling Brews! That is the key to a good install I take it! :) :)

  • sbcookesbcooke Posts: 2,297
    Turn signals took me a while...only because they it intimidated me to work on electric. It was so easy it was silly. The hardest part was removing the stock turn signal to access the wires. I ended up breaking one of the plastic attachment points, fortunately I was able to crazy glue it and it held.

    Once out, you just need to find the positive and ground wires (for the blinker, not the parking lights). There are plastic clips which snap over the new lead and the ones to the turn signal, they cut into the wire and make the connection. Then a lot of electrical tape.

    Strange thing regarding turn signals...when my headlights are off, the stock and ARB ones blink in unison. When the headlights are on, the stock and ARB ones alternate. You can probably wire it up so this doesn't happen, I may have not used the ground, but the lead for parking light? I didn't check with the lights on until after I crazy glued the piece back on and had it all wrapped up...I just left it. They burn out more than not, especially on the trail when I hit water.
  • paisanpaisan Posts: 21,181
    Have to give them props for great customer service. I have one of their bug guards and the clips/fasteners snapped/stopped working properly so I took it off before winter. Now that I'm doing some work on my Trooper I figure I should re-attach it. Called Lund to buy replacement parts and they are sending them for FREE! I didn't even ask them for it!

  • cobbocobbo Posts: 34
    Aloha again, ya'll...
    Finally got a chance to check back in and saw I had missed a few pages, including some discussions about air bags back around the 7350s, seeming to stem from dtlind's accident...figured I would throw in my 2 cents with regards to the accident I had with my 2001 Trooper LTD (a little over 10,000 miles ago) which I reported back in post# 5653...just as a reminder, I ended up going head first into a guardrail about 50mph and the airbags did not deploy. Insurance spent about $12,000 in repairs on the Troop, and I passed 50,000 miles just 2 weeks ago (another 10k and it will be time to buy my 3rd set of tires for T3)...

    Anyway, figured ya'll might want to add my no firing air bags to the list, and take a look at a photo of T3's front end prior to repair...

    Hope all is well,
  • savvas_esavvas_e Posts: 347
    Hi Sean,

    The way you describe the blinkers alternating sounds to me like you do have the ground wrong.

    Does the parking light also flicker and vary in intensity when the blinkers and parking lights are both on?
  • sbcookesbcooke Posts: 2,297
    I don't think so but will check, they just alternate when the lights are on. I probably did use the wrong two wires...I thought about redoing it...but as I said, removing the stock lights was hardest part, and I am worried the next time I remove it will be the last. It really isn't that big of a deal to me...however I wanted to point out to anyone doing the install to check the function with lights on and off before you close it all up.
  • cwmosercwmoser Posts: 227
    Great photos. Also, shows vulnurability of the Trooper to front end hits - don' tlook like much protection there at all. When the Bumper skin is removed, it shows only mounting brackets as minor protection. How about the bumper skin - is it just plastic?

    I remember years ago slowly backing a Trooper into a concrete light pole pillar. The rear bumper caved in massively.
Sign In or Register to comment.