Edmunds dealer partner, Bayway Leasing, is now offering transparent lease deals via these forums. Click here to see the latest vehicles!

Nissan Murano Power Seat Problem

124»

Comments

  • lisah0504lisah0504 Member Posts: 1
    Drivers side seat bracket broken! Wow, it broke a couple of weeks ago and I just thought to look on here and see if this was "common". Can't believe this is not on a recall!
  • seattlescottseattlescott Member Posts: 3
    Got Nissan to pay 50% of my bill too. Good luck to all. drewster, I am curious to what other problems you were starting to have. I love the car too but had B-1 catalytic converter fail me last fall and that was about $1,000.00 to fix ...thinking of dumping the car soon...
  • 06muranogirl06muranogirl Member Posts: 4
    I refused to pay Nissan for the seat and they did not offer half either.
    I had it welded at my brothers roofing shop.

    As far as the Cat converter goes, My daughters VW Passat -2006 had that problem for which it broke off the turbo and melted the brake line. I called Volkswagen and emissions control warranty on the car is 8 years so they fixed and billed the manufacturer. I would hope Nissan had a similar warranty on emissions control items such as a Cat converter.
  • drewster62drewster62 Member Posts: 6
    That's good news (i.e., 50%). Actually, my decision to sell was based on a number of factors: (1) I have never felt safe with what I would consider to be an overly rigid suspension (others have voiced a similar opinion on this forum) to the point where the vehicle "hopped" sideways when hitting an imperfection (such as bridge abutments) at highway speed, (2) the seat bracket issue to include a simultaneous beakdown of the seat cushion material that comprises the driver's left bolster (they fixed that for free), and (3) an apparent degrading A/C system that reared its head just days before I sold. These factors, couple with the current resale value (still had significant residual value), and the incentives offered on new vehicles drove me decision to trade-in the Murano.
  • jeffwilkijeffwilki Member Posts: 1
    Hey all, thanks for all the info on the design flaw on the Murano seat. I am currently going through the process and am at the Regional Specialist part. She (Dorothy) told me it would be reviewed in a case by case manner when I informed her I could help her out with some previous cases. I told her it was a safety issue and that my seat is currently broken so a long time to resolve this would not be feasible. She told me to get it fixed. Where is the motivation for them once I have paid and there is no threat of safety suit?? Can any of you help me out at to the process you went through? Any insight would be great. Thanks.
  • disenchanted5disenchanted5 Member Posts: 1
    We brought car into Nissan dealer and were told seat adjuster is leaning/loose and that seat adjuster links are broken. No one mentioned bracket or a gear. I need to know what to buy in order to fix this problem. Have been reading this blog and it seems it is either a bracket that needs welding or a gear that needs to be replaced. The seat wobbles and moves around when brakes are applied which tends to scare me. Has anyone had a problem with "adjuster links?"
  • seattlescottseattlescott Member Posts: 3
    I had to pay out of pocket because I needed my car back for a trip. Just got my Nissan refund yesterday so about 2 weeks between complaint and check in the mailbox.

    Honestly, even though I was not happy with having to pay 50% on a known defect I guess this went as smooth as I could have hoped for. Good luck
  • badchoice2006badchoice2006 Member Posts: 1
    My 2006 murano had about 30,000 miles on it when the motor that makes the driver's seat go forward and back broke, leaving the seat as far from the pedals as it can go.
    I found a lot of helpful info here, and just wanted to share, in case anyone is keeping track of this issue!
    I have tried for a year to get Nissan to pay for at least half the repair, since the estimate was $1200! I was denied in July of 2010, and reopened the case last month and was denied again. My last letter mentioned the safety concerns, and now that I have found this forum i feel I have more support for my claim since it appears to be a common issue.
    I called an independent shop and their response was - "oh yeah, that's a common issue with Muranos and Pathfinders. It will cost over $1000. "They had seen so many they knew immediately what I was talking about.
    After reading all the other posts about the car I am grateful that the whole seat hasn't come loose yet! Thinking about dumping it, or at least getting an extended warranty if anyone will sell me one!
  • goodengooden Member Posts: 2
    Hi,

    My seat on my 2005 Murano just broke this week. How did you get Nissan to pay 50%?
  • fr8guyfr8guy Member Posts: 1
    welcome to my world. I've had the seat bracket welded by a local weld shop and the bracket now holds

    now i'm online looking for a worm gear for the right side of the front of the seat.. it is plastic and notched out. now the seat moves on one side, not on the other.
    like the car other than 1 the crappy seat and the air bag light

    nissan should be ashamed. it is truly a poor design
  • ncacctncacct Member Posts: 2
    Here is a link to the site for the gear. Make sure you buy the correct one.

    http://www.odometergears.com/products/Nissan/Seat+Gears+%28ALL%29+2003+-+Present- /91
  • pamcookspamcooks Member Posts: 5
    I had my drivers seat repaired for free. First they wanted $900 but the service manager said he would go to bat for me with the regional service manager. After I told him this was my 6th Nissan over 25 years, he really did. Nissan paid the entire bill. I live in Colorado, if that helps.
  • doctormd1doctormd1 Member Posts: 1
    My car seat just broke on Murano 2005, could you please email me at agumiroff@gmail.com and let me know how you got it fixed for free

    thanks
  • steverstever Guest Posts: 52,454
    Please don't ask for "personal" help via email. We all benefit when a problem is discussed on the open forum. Thanks.
  • 06muranogirl06muranogirl Member Posts: 4
    I pulled the schematics for the seat design from a parts ordering page or something, I don't recall.

    I took it to my brother who has basic tools and a welder and he and his friend pulled the seat out completely, unhooked all the wires and cables- There were only a few of them. For example my seat does not go up and down but the wire connections are there for it and plugged in.

    It was pretty basic, unhook 3-4 plastic cables, remove seat completely, set on the ground , turn upside down and weld broken seat track assembly frame back on to the seat.

    Be careful not to burn the cloth seat when the metal heats up, keep water spray bottle on hand.
    Wear welding goggles,
    Simply weld broken part, and then prepare to put seat back into the car, hook things up and its ready to go.

    The entire process took maybe an hour and 2 people.

    Hope this helps, some, I have not had any problems since then with the seat. It will last a very long time, Seems the guys said Nissan did it so cheaply that there was no way for it to hold and it broke, Now it is reinforced and better than original factory .
    Basic tools since he
  • 69vette269vette2 Member Posts: 1
    Consider yourself lucky, I just got a quote from my local Nissan dealer for >>$2100 to replace the seat (mechanism) the bottom part , not the actual leather seat. The car is a 2003 with 131,000, and I will ride on a milk crate before I spend that !!!!
  • goodengooden Member Posts: 2
    This is what I did: I went to a good welder. He removed the seat and welded the broken part and put the seat back in. Probably better than new. It was 165.00.....a whole lot better than 1500.00!! Now I am having problems with the power steering and an oil leak. I will never never buy another Nissan. The Nissan dealership has been absolutely no help at all....disgusted!!
  • pamcookspamcooks Member Posts: 5
    Don't give up. Demand to speak to the regional service manager. Tellhim others got replacements free. Go for it!
  • energydude1energydude1 Member Posts: 1
    My drive side seat broke a few months ago. Nissan offered $250 on the $1000 repair bill. This is a deal killer for me and i will never buy another nissan. They could of had a customer for life and instead I am telling everyone I know to stay away from nissan products. I understand some things will fail but a seat frame is not acceptable especially considering this happens to everyone.
  • bruzer11bruzer11 Member Posts: 1
    I live in Colorado. Which dealer did you go to. Thanks
  • newowner10newowner10 Member Posts: 227
    My 2006 Murano just broke the seat. I removed the plastic parts on the door side and can clearly see the break if you raise the seat all the way. It appears the break is right at the bend of the bracket. It appears if the seat is all the way down in the back there is no load on the bracket. I lowered the back and unhooked the motor. The back of the seat can still be pulled up so I placed some heavy bailing wire to hold the seat down. You can still raise the front and move the seat forward and back. If you normally leave the rear part of the seat down you will not notice the difference. Actually if you normally leave the back down it probably will not beak the other side. If it is a little low maybe a pillow will help. It appeared if you just weld the two parts together it will probably break again unless you have the welder make a brace. I am a little worried if you arc weld is there any chance of the airbag deploying.
  • pamcookspamcooks Member Posts: 5
    Well, as I said, my dealer in Colorado Springs replced mine for free. I have a friend with the same model/year and she took hers to a mechanic who "welded the seat" back together. Don't know the details but it was cheap to do.
  • cjsings2cjsings2 Member Posts: 3
    Just bought my LX used from a Lexus dealer in November with 18,000 miles on it. Not long after I noticed the driver's seat was "clicking" on turns. Took it in to Lexus, they take it to Nissan for warranty work... had to have a part replaced. Meanwhile I'm driving a Lexus loaner. Get it back and all is fine ... for about 2 months. It's back in the shop again. I'm back in a Lexus loaner waiting to hear what will happen this time and it's still under warranty. Maybe I should just turn it in and buy a Lexus. But I really love so much more on the Murano - except the seat, and the A/C, and the wind noise.... Ring bells with anyone else? :confuse:
  • bshlapakbshlapak Member Posts: 1
    Well I have a 2007 Murano and guess what the driver's seat broke again!! This is the second time this has happened. At least the first time it was under warranty. this is definitely an issue with Nissan. I called Nissan Canada after telling the dealership to shove it as this should not happen and they wanted ~$1600.00 to replace it. Still waiting to hear back from Nissan Canada. Poor design and/or quality control. Last Nissan I will ever purchase. But to be honest, are any of the other manufacturers any better? They keep coming out with crap and we keep buying it. :mad:
  • shushiriceshushirice Member Posts: 2
    Hi. May I ask where you got that little nylon gear for the left front seat?
  • pamcookspamcooks Member Posts: 5
    edited September 2012
    I feel bad for you. I have a friend who had the same problem. She went to a body shop and they were able to weld the seat back together and the problem never happened again, that was 4 years ago. Good luck.
    Oops this message was meant for the guy who's seat broke twice. I don't know anything about a nylon part.
  • chasr212rchasr212r Member Posts: 2
    If you are looking for the plastic gear for the Nissan Murano seat, I have seen it listed on ebay for about $80. The gear is expensive but it's cheaper than replacing the whole part that Nissan sells when the gear breaks.
  • shushiriceshushirice Member Posts: 2
    Can't find the sequence I wrote down for replacing the spring type washers that go with the nylon gear for the driver's seat. Anybody got a description of the sequence to reinstall the gear or pictures? Hate to screw up this $65 gear that's worth 2 cents.
  • tankfrank2002tankfrank2002 Member Posts: 1
    My 05 Murano right rear seat Lifter Link bracket broke about a year ago. Dealer told me it was $1000 or more fix. Since I am the only driver I simply put a piece of wood under the broken Lifter Link bracket and drove on. I am very tall so my seat stays all the way back and down. I started reading posts and did some research and have replaced the broken Lifter Link Assembly with a new design Nissan #87473-CA01A that I purchased online from FactoryNissanParts.com (NISSAN of McKinney TX) at a cost of $91.22 plus $9.95 freight. Replacement of the bracket took about two hours time. It is substantially beefier than the original. Go to photobucket.com and search for Nissan Seat Fix to see photo’s of the new Assembly.

    Before you start I recommend putting the seat all the way up and inspecting the front bracket to see if the front bracket is cracked but not full broken and carefully inspect the white gear on the end of the worm drive located inside the right side of the drivers seat bracket. This gear is also a problem and the subject of many posts. My seat moved fine with no one in the seat but when I removed the seat to repair the bracket I noted the gear was cracked. Nissan sells the complete drive assembly but not the gear itself. The gear is available from an injection molding company at OdomoterGear.com for $69.00. They also have an excellent three page instruction manual on their website. This is easily done while the seat is out but I did manage to replace mine later with the seat reinstalled and all the way up.

    Nissan Service Bulletin NTB05-043d provides detailed instructions to replace the seat front lifter, rear lifter Assembly and the Lift motor assemblies. The Rear Lifter Assembly part number on the bulletin has been superseded by 87473-CA01A. The first nine pages of the bulletin are downloadable free online at ww2.justanswer.com. These plus a little common sense will get you through the replacement of the right rear Lifter Link Assembly.

    For the complete 30 pages of the Bulletin Go to NissanHelp.com, select Service Bulletins then keyword filter = seat. This will bring up NISSAN Bulletin NTB05-043d. Join the service for $12.95 and you can down load the complete bulletin.
  • brentbbrentb Member Posts: 8
    What a great, and complete post! I downloaded the entire 30 page TSB, and watched the youtube videos for murano seat repair, and so was pretty comfortable with doing it myself. For anyone considering doing it themselves, here are my observations:
    1. I couldn't believe how easy the seat comes out...4 bolts and unhook two harnesses.
    2. the sheet metal parts are sharp...wear gloves as it will cut you.
    3. The TSB recommends remounting the brackets in the car and then tightening up the bolts to keep things aligned...I did this and it is probably a good idea to do so to avoid binding on the electric motors.
    4. It took me 6 hours start to finish, mainly because I was careful to document what I took loose and to be sure I could get it back together again! Next time I"m sure I could whip through it in 2-3 hours.
    I may post my own youtube video showing what I thought were some of the tricky parts that aren't shown of the videos already out there.
  • bigcorbigcor Member Posts: 1
    Had the same problem so many Nissan Murano owners had or will have. After reading on this site how much the dealer would charge, I just took it to a auto body shop. I had them weld the bracket back together for only $150.00. I was not going to give the dealer $1000.00 plus for an inferior product. Try the weld, it's a much stronger and cheaper fix.
  • salsa_stevesalsa_steve Member Posts: 1
    jb2510 - How did you turn off the Easy Exit Feature on the Murano?
  • chasr212rchasr212r Member Posts: 2
    It may depend on the year of your Murano, but there are settings that you can change using the center dash display menus, and one of them is the option to turn the seat settings memory on and off. If you have an owners manual it should be explained in there otherwise do a Google search for the procedure for your year Murano.
  • whitallwhitall Member Posts: 190
    Wow, It's been a long time since I've needed to post....I just got thru the Murano visor problem last month, got a used one and it was 3 screws..Dealer wants over $300 from what I read, my cost...$50.

    Today I realized the little thunk I've been feeling on turns is the seat problem. I got out and pushed the seat towards the passenger side and the rear lifted right up. Clearly not connected to the track.

    I assume it is the broken area that can be welded as it works well otherwise. Will this problem get worse? I am tempted to just trade it in and be done with it, without even reporting it to Nissan. It's an 06 with 46000k miles. My extended gold preferrred warranty ran out mid July. They wouldn't cover the visor so I know they won't cover this (plus that's what I've read.)

    How do you locate a body shop to do this? I have a big one near me, but they do a lot of insurance work and this is probably to small for them. Seems like some of them just don't this type of job. Is it best to take the seat out and just take it to a welder, though I'd really rather have a shop remove the seat, fix it, and reinstall it. Does it need to be "reseated" into the track, or is it easy to put back in? Is is realistic to weld it while it's in the car?

    I really don't want to pay the dealer price because, after the visor issue, I'm starting to think that more things will fail....and don't want to invest in it, but I only have 46k miles...planned to keep it 2 more years.

    Guess I need to post on the trade in value thread to see what I could expect....
  • jfish18jfish18 Member Posts: 1
    I bought a 2012 Murano new in March 2012 and have had constant issues with my driver seat moving upon breaking. The seat moves back to front. And at one point the seat even moved left to right upon turning. The movements are minimal, but very annoying and likely unsafe.

    Has anyone else noticed anything similar?

    Thank you, and safe driving
  • shedianecshedianec Member Posts: 1
    I have the same problem with a broken driver seat. I was told by the dealer that the seat frame track was broken. The left side does not go up. The seat is now at it's lowest point. The dealership wanted to charge $2000 to repair.
    What kind of shop do I need to take it to for the welding repair? Thanks for any response.
  • pamcookspamcooks Member Posts: 5
    My friend took I to a body shop and they welded it back together.
  • mprasek1mprasek1 Member Posts: 1

    I have the same problem on 2006 Murano. Bought an aftermarket part online for approx $100. http://www.dormanproducts.com/p-64907-924-227.aspx

    Will use this video to help me with the replacement. http://www.youtube.com/watch?v=hpCuBoWbNBk

  • brunobravobrunobravo Member Posts: 1

    I have a 2004 SL AWD and this driver seat frame break has happened twice already. At Amazon.com, you can get the new bracket for around $80.00 that includes S&H. The repair will take about 2 hours (or so). Youtube has tutorials on how to do it.

  • golfernutgolfernut Member Posts: 1
    Late to this party, but here goes. I have an 06 Murano, just over 195000kms on it. I have the broken seat issue. But get this...I was told it was broken because one of my son's toys got stuck in under the seat. When I asked the dealer to fix it, which they said they attempted to do but could not, and quoted me $1000 for a new seat, I thought...hmm...I am the only driver, doesn't matter if it wont adjust back and forth. However, when I got back into my car after the dealer tried to fix it, it was lopsided , listing to the right and the left rear post it sits on was ruined. I drove home leaning way over, but didn't know what else to do. Didn't help I had my young son with me and had he not been (what I later realized) suffering from a fever, I would have gone back into the service dept and reamed them out for further wrecking my seat. I have always believed it was my son's toy that wrecked the seat. Now I read about post after post saying it is a defect!!!!! AHAHHHHH. Today I learned that my rear camera , which stopped working a week ago, can be replaced for $850!!! And my gas gauge sensor thing in my gas tank, which stopped working a while ago...will cost about $1300 to fix....so I still use my odometer to measure my gas level.... I love this car but I am tired of hearing..."hmmm that's an unusual problem, we will have to order that part in" from my service guy. Wish my dad was still alive, he would be mad as hell. He was a Nissan dealer for 20 years. Wish I had some contacts!!!! Any suggestions?
Sign In or Register to comment.

Helpful Tools

Most popular vehicles