Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!





Dodge Durango 5.7 Hemi Engine Failure

18910111214»

Comments

  • Excellent!
    I'm glad you got it going!
  • I had an AAA Extended service contract after they tried for a couple of weeks to get out of it they paid for the replacement motor from Powertrain Products a rebuilder that addresses all known problems and gives an optional 4 year nofault warranty. The AAA weasels are almost as bad as MOPAR since there was less than a month on the contract when the engine went
  • We'll my nightmare with my Durango now continues with Promar Engines. After just 4 months in the truck the engine failed! Promar's warranty is not worth the paper it's printed on. The first words out of them when I called is it's not under warranty.

    My engine was running badly right from Day 1. I took it into several mechanics including my local Dodge dealership several times. Just 4 months after the install I have a massive antifreeze loss with no leaks from the system. My mechanic found a blown head gasket! Promar Engines warranty was a complete joke. Any excuse at all not to cover repairs for their inferior workmanship. My local machine shop looked at the head gasket and said they are using inferior parts!

    BS Reason #1 I was I didn't return the core in time. Complete garbage since they knew I'm in Canada and I had to drive the block over the border to ship as they wouldn't ship the return from Canada. I was in constant contact with them and they knew exactly then the block would ship. Not once did they say that I was late with shipping the block and warranty would not be covered.

    BS Reason #2 was that the block overheated. Complete garbage again since it was a head gasket that failed due to their crappy workmanship and parts. Without any pics of the heat tabs they installed he said they were melted. Even if they were melted it was because of loss of coolant from the blown head gasket.

    I have been in touch with another Durango owner from this message board that has also had problems with a ticking lifter from Promar. These guys are complete scammers. Warranty is non-existent.

    Email me if you want more details about these crooks.
  • I read through a lot of these posts, and there is one key factor causing almost all of these engine failures: valve springs. Daimler sourced out a lot of items overseas from China to get super cheap sensors, cheap weak plastic cowls and inferior valve springs, which affected mostly 03-04 Ram trucks and 04 Durangos (and some 2005s built in 2004 as they used up the engines with the problematic springs).

    Look at it this way: the spring breaks thus not pushing up the valve. The valve slams into the piston head a few hundred or thousand times not letting it go all the way up, sometimes twisting the piston just a little with each contact. After a few hundred or thousand times, it twists or breaks the piston rod which then slams into the side of the block a few dozen times until it breaks through.

    Those of us that have had these Durangos for a while and are enthusiasts are familiar with this problem, and recommend taking the still running Hemis (03-04 Rams and 04-05 Durangos) to the shop and replace the stock springs AND RETAINERS with some quality springs/retainers (like from COMP cam). Order some online and have a local shop install them (NOT A DEALERSHIP) since many times the parts that the shops/dealerships get are OEM factory or cheap overseas parts, and prone to failure just like the original parts were. Quality brands like COMPcam do not have these weaknesses as they are designed for heavier use, tracks, racecars, drag strips, and so on.
  • Well I joined the club today. my Durango made it 3 houses down the street then " Boom, Bang, clunk"" I now have a hole bigger than a softball in the side of the block 3rd cylinder back on the right. guess there is no need in crawling to Chrysler for help after reading the posts on here. I am amazed at how thin the block 5 inches above the oil pan. Anybody got a good block ?? hate to get rid of truck because it's still in great shape but I think here in Kentucky, its going to be quite pricey to find a short block.

    Glad I changed my plans for travelling for thanksgiving.
  • I had trouble with my 2005 dodge Durango and I have found that I need to make sure the gas cap is on tight and it has helped with the issue!
  • I changed my plugs out last night and noticed that 3,5,7,6 & 8 were bad rusty. I was wondering where the water was coming from and figured it had to be as described above. I also noticed water in the oil fill cap which is directly under the cowl. The plugs were tricky to remove due to the rust so be careful and work them in and out until broken loose.
    I have had the Durango for 3 years now and have had no trouble at all from it other than all the door and window gaskets are deteriorating. Overall it is one of the best vehicles I have owned.
  • hemisuckhemisuck Posts: 1
    2013 dodge Durango 5.7 hemi sputtering...... with only 643 miles.......yes 643....! Chrysler won't do a thing about it......! SAID THATS JUST A HEMI.....! Hahahahaha SHAME ON THEM......! The government should tell them next time you need money dodge......fix the hemi 5.7 first! Or go back into bankruptcy like you should be..... or out of business.....! Run before you buy a dodge! Or I told you so!
  • canmorcanmor Posts: 1

    Add my 2004 Durango to the list. We'll maintain, never raced. Threw a rod doing less than 25 mph. About 85,000 miles ( aprox. 128000 km). If I known there was an issue maybe could avoided the pain and inconvenience. My Durango 5.2 1999 had double the mileage, no problems. Obviously, not my driving or maintenance. The manufacture needs to take ownership of the problem, or risk future clients.

  • I recently purchased an 04 Durango limited with the 5.7hemi May of 2013, for $8K. It had 113K miles the guy told me he got the car from a dealer friend and it had a noise in the engine so he replaced it with a used engine with 109K miles. I was happy the guy was honest with me and said no problem checked it out it ran and drove perfect with lots of power. He was able to sell me a used car warranty (thank god). We drove it that summer and pulled our pop up which we used an 01' Blazer for in the past. This Durango pulled like a dream no problems. We had a rain storm on the way home on the one camping trip and I remember opening the hood at the gas station just to check the oil. I noticed a steady flow of water running onto the center of the engine, I even showed my wife saying that does not seem right but still we had no problems so I ignored it. Early December my wife went to start it in the morning and it sounded like a jack hammer. I made arrangements with the warranty co and had it towed to my local garage. They said a rod was through the block the warranty paid for a reman long block and we have it back running great I still get the water dripping on the engine and have tried to stop it with weather stripping but it still leaks were the windshield wipers go through. The garage said they seen no signs of water in the engine but I really think it was hydolocked. How else would rod break under no load?

  • I forgot to add the Durango has 116K miles now my wife does not drive much. Hense the reason we got a gas guzzler.

  • 2005 Dodge Magnum R/T 5.7 Hemi with 91,000 miles. Ran like a scalded cat for years - LOVE this car! Changed the oil religiously with synthetic. Interior/exterior are immaculate, relatively new Borla stainless cat-back exhaust, aftermarket wheels, and new Michelins.

    Pulled up to store Sunday night - running fine. Went inside for 10 minutes. Came out to the car - tried to start engine and there was little or no engine compression as the starter spun really fast. Tried to start again and when it finally fired up it had a horrible miss and it sounded like a horrible metallic rattling sound. I immediately shut off the motor, opened the hood expecting to see a metal coat hanger wrapped up in the serpentine belt but everything externally on the motor was fine. No leaks. Nothing. Had it towed to the Dodge dealer. $500 later he says a valve seat dropped into #3 cylinder and destroyed the piston, cylinder and the head. They first quoted me $8,500 but have now dropped to $6,500 installed out the door for a Chrysler re-manufactured engine with a warranty.

    LOVELY :-(

  • mas18mas18 Posts: 1

    Latest 2004 Durango victim here.

    After a rain storm on 4/15/14 I attempted to start my 2004 5.7L Hemi Durango and heard a horrid metal flying around type of noise. I did not attempt to start the vehicle again. I noticed small pieces of metal on the ground under the engine. Eventually I found a hole in the engine block. The vehicle was well maintained and the oil level was fine when I checked it on 4/15/14. It had 105,000 miles on it. I have found many similar complaints on safercar.gov. I called Chrysler (case # 24896456) and was told nothing can be done. I filed a complaint with NHTSA and the BBB.

    I emailed Chrysler and here is their response.

    "Thank you for contacting the Dodge Customer Assistance Center.

    We are sorry to hear of the concern you have experienced with your engine. After thoroughly reviewing your request and the files on this matter, we respectfully concur with the decision rendered by our Customer Service Representative.

    We're sorry we cannot provide a more favorable reply.

    Thank you again for your email. Should you require additional assistance, or have any new information to provide, please reply to this email message or call 1-800-4A-DODGE (1-800-423-6343).

    Sincerely,

    Eileen

    Customer Service Representative Dodge Customer Assistance Center"

    Hello Toyota....or maybe a new bike that doesn't have floor mats!

  • sorkasorka Posts: 3

    Wow! I'm stunned. So many of the exact same failure and Chrysler is not stepping up to the plate. I had the dreaded shift motor failure a few years ago. It cost me $2000 to replace the transfer case as the shift motor was on permanent backorder. I've also had the AC fail multiple times. Chrysler never stepped up to plate to fix any of this even though many had experienced the same failures. I've spent over $3500 on dealer repairs in 116K miles. Some may say that's not bad for that kind of mileage, but I'm use to getting hundreds of thousands of miles out of cars without any failures. I just sold a Lexus SC400 with 334K miles and it has never had a failure or repair of any kind. It drove like the day I bought it when we sold it. No creaks or rattles or anything.

    After reading through many of the posts in this thread, I've decided to sell our 04 hemi limited Durango hopefully before it fails. There's nothing wrong with it now, but I can tell it's just a ticking time bomb. I won't drive it again unless it's for sale activities like moving it to the driveway to wash and detail it or to meet a prospective buyer. I'm NEVER buying another Chrysler product again. Kbb private party is $7600. I'll be happy if I can get $5000 which is less than dealer tradein.

  • Same thing. I have an 04 Durango with a Hemi. The car has always had a sputtering problem after a rain or a carwash. I never put 2 and 2 together because it did not happen right away. Thought maybe I had bad gas. My car has 87k on it. My wife drove it day before yesterday no problem. I went to start it yesterday in the rain, I thought a cat had been under the car when I started it, all hell broke loose. I looked under the hood and found nothing. I looked it up on the internet and my jaw dropped at all of the identical issues. Mine would start and sound like someone beating on it with a hammer, now just smoke and wont start. Unbelievable.

  • sorkasorka Posts: 3

    Detailing it this weekend and getting it smogged and ready to sell. No way I'm waiting around for this to happen.

  • leelee11leelee11 Posts: 1
    edited April 28
    My 2004 durango wouldn't start at first I thought battery or starter, I waited a few minutes tried it again, it started but then made a tick tick tick noise very annoying it has 94,0000 miles on it. Brought it to the dealership they said its an internal engine problem they can replace the engine new for $,7,000.00 or a used one for $4,000.00 . I said I have never owned a vehicle and the engine went. I said do you know why the engine would go, the dealership replied they dont know why it happened.
  • sjjs714sjjs714 Posts: 1

    Has anyone gotten any sort of response or anything going on this? I now have to replace the motor a second time for the same issue!!!!

  • My name is Wayne and I'm new here.

    I have a 2004 Durango with the 5.7 hemi with 72,000 miles on it. My wife started it the other day and even though a rod did not conme out of the block I can just tell that something bad happened inside the engine. I'm going to pull it out in the next couple of weeks so I'll post again after I know for sure what happened to .it.

  • We just bought out 2004 Durango with 5.7 Hemi less than 5 months ago, it had the same problem, misfiring in the rain and then with no warning threw a rod this morning. The dealership we got it from is only will to pay for half the repair, which I can't afford regardless. So now I have no car with a year and a half left of $500 per month payments. Then I see all these other complaints. Not only should Dodge do something, but anyone who sells used cars should be ashamed of themselves for sell cars with well known engine failure. What we need is a Class Action suit, I'll be looking into it.

  • habojrhabojr Posts: 1

    :@ This also happened to our 2005 dodge magnum RT hemi. no warning on the dash. No codes in the system. We purchased the car new from the dealer .we have done all the scheduled maintaine. With only 63,000 miles .needless to say a very big disappointment. now the engine is seized. I am thankful this happen on the way home from work, and not on my way to Havasu. Doing a little looking around on the internet .this appears to an issue with the 5.7.

  • wshmidheiserwshmidheiser Posts: 2

    I posted June 14th about the engine noise in my Durango.

    I got the engine out (what a job) took it to our local machine shop and received a call today with the news. Bent connecting rod in #7 cylinder. Hydro-lock. The engine is in great shape except for that. Oh well it looks as though everything that I have read about is true. I am going to get it rebuilt and I'll post with the results when complete.

  • rladdrladd Posts: 2
    I see I'm in the same boat as a lot of people. I just recently blew the engine in my 04 Durango with no warning or anything and owe too much on it to just sell so have to get a new engine. It threw a rod through the driver side engine block. I'm looking for an engine and they aren't cheap. Does anyone have any idea where to find a good remanufactured one if possible? Dodge really needs to get a grip on not selling junk and own up to their mistakes.
  • Mr_ShiftrightMr_Shiftright CaliforniaPosts: 45,648
    This is a duplicate post so I'll address it here as well. My opinion is that you should first find a reputable installer who has already done a number of crate engines---he probably knows the best suppliers because he is just as interested as you are in having a hassle-free experience.

    MODERATOR --Need help with anything? Click on my name!

18910111214»
Sign In or Register to comment.