PLEASE HELP ALL CODES FOR MY PASSAT

oliverp72

So i'm making this forum because I want to fix everything wrong with my 2005 volkswagen passat. It would also help if you let me know which of these codes I need to fix and the priority each code would be and what order I should fix each code in. Please leave a comment if you know how to fix any of the issues with my car. Thank you.

CODES:
17881 Active/Static Leak diagnosis pump - EVAP emission ctrl system,Open circuit-No signal/communication.

17833 Active/Static Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80,Short circuit to ground-Lower limit not reached.

17955 Active/Static Wastegate bypass regulator valve- N75, Shortcircuit to ground- Lower limit not reached.

17525 Active/Static Bank1-Sensor2, heater Circuit, Short circuit to ground-Lower limit not reached.

17843 Active/Static Secondary Air Injection Pump Relay-J299,Short circuit to ground-Lower limit not reached.

17829 Active/Static Secondary air inlet valve-N112,Short circuit to ground-Lower limit not reached

17697 Active/Static Turbocharger recirculation valve - N249,Short circuit to ground-Lower limit not reached

17523 Active/Static Bank1-Sensor1, Heater Circuit,Short circuit to ground-Lower limit not reached.

18265 Active/Static Load Signal,Error Message from Engine CM-mechanical malfunction

01336 Passive/Sporadic Combination Comfort databus-Faulty

01330 Passive/Sporadic Central control module for convenience system -J393- No communication

01304 Passive/Sporadic Radio-No communication

01331 Passive/Sporadic Door control module on driver side -J386-No communication

01332 Active/Static Door control module on passenger side -J387-No communication

01333 Passive/Sporadic Left rear door control module -J388-No communcation

01334 Passive/Sporadic Right rear door control module -J389-No communication

01336 Passive/Sporadic Combination Comfort databus-Faulty

thecardoc3

Concentrate on the "Active" codes, don't worry about the "Passive/Sporadic" ones at this time. Have you checked fuses? Specifically fuse # 34 for power to and through it?

Mike_Siegal

Man...that's quite a List.

• WHICH CODE Reader did you use ?
  

BelAlli

@oliverp72 said:
So i'm making this forum because I want to fix everything wrong with my 2005 volkswagen passat. It would also help if you let me know which of these codes I need to fix and the priority each code would be and what order I should fix each code in. Please leave a comment if you know how to fix any of the issues with my car. Thank you.

CODES:
17881 Active/Static Leak diagnosis pump - EVAP emission ctrl system,Open circuit-No signal/communication.

17833 Active/Static Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80,Short circuit to ground-Lower limit not reached.

17955 Active/Static Wastegate bypass regulator valve- N75, Shortcircuit to ground- Lower limit not reached.

17525 Active/Static Bank1-Sensor2, heater Circuit, Short circuit to ground-Lower limit not reached.

17843 Active/Static Secondary Air Injection Pump Relay-J299,Short circuit to ground-Lower limit not reached.

17829 Active/Static Secondary air inlet valve-N112,Short circuit to ground-Lower limit not reached

17697 Active/Static Turbocharger recirculation valve - N249,Short circuit to ground-Lower limit not reached

17523 Active/Static Bank1-Sensor1, Heater Circuit,Short circuit to ground-Lower limit not reached.

18265 Active/Static Load Signal,Error Message from Engine CM-mechanical malfunction

01336 Passive/Sporadic Combination Comfort databus-Faulty

01330 Passive/Sporadic Central control module for convenience system -J393- No communication

01304 Passive/Sporadic Radio-No communication

01331 Passive/Sporadic Door control module on driver side -J386-No communication

01332 Active/Static Door control module on passenger side -J387-No communication

01333 Passive/Sporadic Left rear door control module -J388-No communcation

01334 Passive/Sporadic Right rear door control module -J389-No communication

01336 Passive/Sporadic Combination Comfort databus-Faulty

First of all clear all fault codes and then drive 10 miles and reread errors.