Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Did you get a great deal? Let us know in the Values & Prices Paid section!
Meet your fellow owners in our Owners Clubs

1950 Lincoln Cosmopolitan



  • Sorry, it's the lead guitarist who sings the song that is pictured with the '50 Lincoln, no Commander Cody. Bill Kirchen from "Commander Cody and the Lost Planet Airmen" was at the car show, saw the car, autographed the dashboard & had his pic taken with the car. He also asked that the car be at the stage when he sang the song.

    Current bid is $25,500.
  • in 1950 there were about 538 made
  • There are three 1950 Lincoln Cosmos in Hemmings Motor News, varying in price:

    1950 Lincoln Cosmopolitan 4dr sedan. 2 tone green. Ca.unrestored rust free survivor. 76k miles. 337 V8 & hydramatic run well. P/windows and seat work... more... $10,500
    Location: Walnut Creek, CA

    1950 Lincoln Cosmopolitan sedan, all or part, nice solid body & nice grille, trim, etc. 209-984-5858, CA.**15-YR**... more...
    Location: Jamestown, CA

    1950 Lincoln Cosmopolitan sedan, gorgeous example, has correct mint interior, Verde green exterior, smooth & quiet flathead, nice as they get.... more... $19,500 Location: Santa Barbara, CA
    For sale by: Auto Store
    Cars shown by prior Appointment
    Santa Barbara, CA 93103
    PH: 805-966-3272
    FAX 805-966-3202
    For pics:
  • While this isn't experience on Cosmos, it relates as the cars are 50's vintage with the same "challenges" (except my hearse).

    I have had the frame cut on my '51 Ford business coupe, '53 Ford Victoria, and '68 Cadillac hearse to accomodate dual exhausts. No problems with frame issues, they are strong enough that the metal that was cut out didn't compromise the frame's integrity.

    As to wiring, IIRC the insulation on the 50's wiring was tar-impregnated cotton. It's, as we've all experienced, vulnerable to age and will get brittle over time. Any kind of kinks in the wiring will cause the insulation to fray and expose the wire itself. My '49 Ford had to be re-wired, and I sat down with a Motor's Manual, set of connectors, & 5-6 rolls of colored wire and hand re-wired it; only problem was using the high beams made the taillights go out. :blush: I also didn't rewire the dash, which would be a huge task by itself. But it was arduous and only really possible as the headliner was gone and all the main wiring was (relatively) easy to access - not sure how the wiring could be pulled through the top with the headliner in place without difficulty.
  • I don't know of any shops off-hand that will touch a flathead - it was accurately stated most mechanics have never seen one, let along worked on one.

    You can order short blocks from classic car companies, but they are spendy and shipping is nasty.

    I overhauled the flathead 8 in my '51 coupe about 20 years ago and it was quite an experience. The big thing is - get adjustable lifters!! The stock lifters are solid, so to adjust the valves the end of the valve itself has to be carefully ground off; too much and you have to start over with a new valve.

    It's actually less complicated than an overhead 8 as the valve train is much simpler - no rocker arms or pushrods. But finding the parts locally can be a real challenge. I was lucky and found a local guy that had lots of specialized flathead parts and worked out of his garage.

    I also replaced the pushrod for the fuel pump in addition to the pump itself. Of course the carb had to be overhauled and the oil pump replaced, along with all the usual stuff like a crank kit, rings, boring over (if necessary), etc. If you've overhauled any overhead valve motor, the flathead will be different but easier for the most part.

    Hopefully this isn't a boring review of what everyone already knows, was hoping to add to the knowledge of the group.
  • I'm looking for a front windshield for my 51 lincoln cosmo. measurements are
    18 inches by 58 inches.
  • jimmgjimmg Posts: 2
    I have a 1950 Cosmo used as a Limo at this time.I was wondering if anyone out there knows of a good advertising site or if someone out there could give me an Idea what it might be worth.I got so attached to it I am not sure if i'd like to get rid of it.Also how would I look up the previous owners I was told it was one of two Cosmos that belong to President Truman but I could not do a VIN check on it because it only has 9 numbers as a VIN rather than 17 Thanks Jim
  • benjaminhbenjaminh Posts: 4,292
    edited July 2011
    I remember reading about Truman driving one of these (or being driven, more like)! Don't have answers to your questions, but I hope you'll post a link with some pix...
    2018 Acura TLX 2.4 Tech 4WS (mine), 2018 Honda CR-V EX AWD (wife's)
  • jimmgjimmg Posts: 2
    I did research on Truman called the museum in Missouri.They say they needed proof of this.That they don't have the Vin's of his cars.Maybe I can call the White House LOL Don't know how to post a link.Can anyone help
  • Mr_ShiftrightMr_Shiftright Sonoma, CaliforniaPosts: 64,490
    Here's what I have from the Truman Library:

    "The 1950 custom Lincoln Cosmopolitan 7-passenger limousine was one of nineteen vehicles made for White House use. It was garaged at Metuchen, New Jersey and was reserved for President Truman whenever he was in the New York area. Alexander J. Barket gave the limousine to the Truman Presidential Museum & Library on April 14, 1972. It has a special body built by the Henney Motor Company of Freeport, Illinois under the direction of the Lincoln-Mercury engineers and with the aid of Lincoln technicians. It is equipped with a high compression V-8 engine. The limousine is part of the museum's permanent collection."

    Harry like Chryslers for personal cars. He even took a road trip, just him and his wife alone (!!!) in 1953, and stayed in motels along the way.
  • I've read that after Harry handed the White House keys over to Ike, he and Bess drove back to Missouruh, taking their time and stopping along the way to visit friends......the presidency wasn't quite so imperial in those days. As to the '53 road trip, some old folks still remember Harry stopping at gas stations and drinking Cokes with mechanics in the garage,etc.
  • benjaminhbenjaminh Posts: 4,292
    I'm not sure, but I think he actually took a train most of the way back home. But you're right, he liked to drive and had the people's touch. We don't think of Truman as particularly charismatic, but I met someone who knew him and said that even when he was in his 70s he had amazing presence...
    2018 Acura TLX 2.4 Tech 4WS (mine), 2018 Honda CR-V EX AWD (wife's)
  • tg1957tg1957 Posts: 3

    I'm researching these cars, too, and need to get in touch with you about yours. Do you mind sharing the 4 middle #s of the VIN (serial number)? Should be 62- -. You can do it privately if you wish.
  • tg1957tg1957 Posts: 3
    edited August 2011

    See post # 79 above about your car.
  • I need your email to reply, thanks. Richard
  • dodgeazdodgeaz Posts: 4
    not sure what #s you are looking for mine starts 63
  • tg1957tg1957 Posts: 3
    It's gibs8662"at" (just replace at with @)
    I'm only concerned with the 145" wheelbase Cosmo limos at this time,
    so thanks in advance.

  • berriberri Posts: 9,866
    The October Hemmings Classic Car magazine has a feature article on the 1950 Lincoln Cosmopolitan.
  • Mark is it a convertible or coupe 1 piece curved windshield, i need a 1950 cosmopolitan convertible windshied bad was told it is 18x58
  • do you no how to put that windshield in
  • have you found a windshield yet, if not i may no were one is its nos
  • need parts for 1950 Lincoln cosmos convert 1 need drive side fender spear , 2 need driver side chrome piece that the park light is mounted in,3 passenger side interior windshield trim a picture of the outside were the stainless trim meets stainless at the convert top there is a gap there I think a piece is missing HELP
  • Mr_ShiftrightMr_Shiftright Sonoma, CaliforniaPosts: 64,490
    tough items. You may have to go to that huge Hershey swap meet:

    HERSHEY 2013

    I wonder if some sedan parts would work? You might visit the Lincoln parts section at
  • stick5351stick5351 MichiganPosts: 1
    I just bought a 1949 Lincoln Cosmopolitan Pickup Custom, and I would like to know if there is any info out there on when where and by whom it was originally built. Thanks
Sign In or Register to comment.