Edmunds dealer partner, Bayway Leasing, is now offering transparent lease deals via these forums. Click here to see the latest vehicles!
Popular New Cars
Popular Used Sedans
Popular Used SUVs
Popular Used Pickup Trucks
Popular Used Hatchbacks
Popular Used Minivans
Popular Used Coupes
Popular Used Wagons
Comments
I have heard people over oiling the K&N style filter which causes problems with the mass air flow sensor.
You can also buy it at http://www.crutchfield.com/S-JGvw85ww2Ps/cgi-bin/prodview.asp?i=257KDAR560 they also send an installation kit and have great customer service if you need help. It costs a few dollars more even after their free shipping. They both carry the JVC Sirius box (SIR-JVC1) for about $100
this weekend my wife and I took a sevatical , and did 800 miles in mine ,over like 5 major Colorado passes and saw 15 fourteeners in just one county ,
and about 2 thousand beemers, jags furrarries, Zs. (MMMMMMMMMMmmmm)
, Lambos Merc's, Astin Martins, Diablos, De Lor ,, U name it...........
and I would' nt let any of them pass meee !!!!!!!!!!!!
the horsies, the room, and surprising the gas mileage.
05 cc 4x4 SE Auto,Storm Gray
THANK YOUUUUU..
tH AN K YOOOUUUUUUU.
regarding the color has been all from my frens sayin yep my next truck is gonna
be gray-silver , personally I liked the granite from previous years, But I was looking for a desertgold or some kinda kewl gold metalflake but with some brown tincture, my 03 cc was Silver Ice a solid color and showed dirt and dust tooo..
so I jus gotts ta wipe her down more often, hmmmmmmmmmm
shucky darn !!!!
I'm looking for these key fobs and I am in Ontario and was wondering if you could provide me with the source where you purchased yours.
Good Luck.
The noise I am talking about happens only when I first beging to accellerate forward, usually at about 10 MPH. The noise is a "clink."
Good luck to you.
Also, how much did you pay for your XE? Except for the package I have to buy to get A/C, I'm pretty much looking for the most stripped down Frontier I can find.
Now the real question, do I want a truck with an average of 18 MPG, tough looking and off-road ready? Maybe a car with 30 MPG, sporty, and less money is the wise choice. Ahhh, decisions, decisions .......
I just bought a new 05 SE CC 4x4, and the only issue I have is that the truck does not come with Keyless entry. To make things worse, the only door with a key lock is the driver door, so I have to carry my kid around to the drives side, unlock the doors, and then shoehorn him into his childs seat.
The truck has power doors and windows ( I thought all SE's came with that, but correct me if I am wrong. ).
Can I just purchase one of these key fobs from ebay, and program it up and have the keyless entry?
I tried going to one of the local stereo/alarm/remote start places to see if they have fobs that you can program up for the frontier, but they seemed to think that it would not work.
I have seen the postings by canadian guy, ontario guy, and the others but I am unclear if all SE versions come with the receiver, or if there is more to it.
p.s. - Love the truck, just wish Nissan didn't dick around over something as basic as this.
Thanks.
Would you be able to post the proceedure that you used to program it? I actually was told by the sales person that the truck came with the remotes, but after we signed all the papers she told us that the deal did not include the remotes.
I complained about that (not very happy that they would pull that after signing everything), and tomorrow she is supposed to get back to me with an answer about getting the remotes.
I would like to be able to go into the dealership and program one up, so that they cannot try telling me that it does not work, and to forget about it.
So is this a tranny cooler or am I seeing something else?
Thanks, Beck
Where can I find a set of tie down cleats for the Utilitrak system? I went to a dealer the other day and they wanted $50 for ONE! And it was huge...the size of my hand. I expected several small ones in a set.
I've also had no luck trying to piece something together at the hardware store.
Any ideas would be appreciated.
Thanks, Beck
This forum has been a huge help. Thanks to will and water for all of the advice, and also to all the other people that have answered this question in the past posts..
Go Yanks!!!
Step 1) Sit in drivers seat, close and lock all doors.
Step 2) Insert key into and remove it from ignition key cylinder more than six times within 10 seconds.
(Hazard warning lamps will then flash twice).
NOTE:
Withdraw key completely from ignition key cylinder each time.
If procedure is performed too fast, system will not enter registration mode.
Step 3) Insert key into ignition key cylinder and turn to ACC position.
Step 4) Push any button on remote controller once. (Hazard warning lamps will then flash twice).
At this time, the oldest ID code is erased and the new ID code is entered.
Step 5) Do you want to enter any additional remote controller ID codes?
A maximum of four ID codes may be entered. If more then four ID codes are entered,
the oldest ID code will be erased.
If you do not want to enter any additional remote controller ID codes, go to Step 9).
Step 6) ADDITIONAL ID CODE ENTRY
Lock all doors with LH (driver side) lock/unlock switch
(in main power window and door lock/unlock switch).
Step 7) Push any button twice on remote controller once, (Hazard warning lamps will then flash twice).
At this time, the oldest ID code is erased and the new ID code is entered.
Step 8) Do you want to enter any additional remote controller ID codes?
If so, unlock doors then repeat Step 6) and Step 7).
Step 9) When complete, open door, and check operation of remote
hope it helps,
vuch
later,
vuch
ps. I also have a 05 CC SE. Great truck, like it more every day.
Nothing happened.
I have seen one post where waterman said that he did not get flashing lights, etc.
I guess I will have to wait and see.
Thanks for the post!
The answer is a defnite YES.
I have not been on this site in a long time and can't believe the same old Frontier-bashing going on by guys who didn't even test drive one. They are so closed-minded.
BUT...that means more Frontiers available for the rest of us! Long live objective and open-minded car shopping.
I had tried the Key trick on an earlier day and didn't get the flashing hazard lights.
Will purchase a FOB and see if it will program.
I will keep everyone informed and may need some guidance.
I also tried taking this up with my dealership, and they seem to be giving me a bit of a run around. Every other dealer in my area has told me that this would work, but they seem to always hedge on an answer.
The best that they have been able to do is e mail Nissan Canada, with a tech question on the issue. I am still waiting to hear from them on this.
I actually called Nissan Canada, and asked them myself, but they seem to be pretty reluctant to say anything about it. All that they would say is that "...adding electronics to a system that does not come with that option, would not be recommended by Nissan.".
I suggested that all of the electronics were already there, and in my opinion, programming a key fob does not constitue adding electronics, but all I got was the same line I have quoted above.
For whatever reason, (probably because I specifically asked the sales person about the key fobs, and she said that they did come with the vehicle...), I feel that the dealership should provide me with a couple of fobs if this works, but I am having a hard time pinning them down on this.
I get the feeling they are going to hide behind Nissan on this one, but atleast there is e-bay and this forum to help me out.
I think the receiver you have to buy is way too expensive so I am trying to find an alternative for my altima but have had no luck yet.
I have seen the unit on the internet for about $375 but still that is more than what it should cost. I chose sirius because the programing is way better and seems better organized.
Hope this helps! If you do go back let me know what they charge you
This noise come from the left front cylinder and is a definite metal to metal tap. It starts making this noise after the trucks engine has warmed up and the oil has had time to thin out some.
Do any of you or have any of you experienced the same thing?
Thanks again.
Brad.