Won't crank - Calibrate on Radio
stonehouse
Member Posts: 2
2000 Montana with 145,580 miles. Third owner. First owner to 32k... second to 128k... now in the nickle and dime stage, it is ME (lol).
Drove fine with NO signs of any problems. Then, my wife tried to start it, the next day... and nothing. Now there are a few things to note. Lights seem to be at full power (but did try to jump it). All the shift positions are lit. Radio says "calibrate" when key is left in run position. When turning the key to attempt to start... a low volume "bump" is heard through the speakers. There is a after market starter, tried just simply un-hooking it. Still nothing, Put new (salvage yard) starter on. Jumping the solonoid produces the bendix noise... but no contact with flywheel.
100% stumped!
thanks in advance for your advice...
Drove fine with NO signs of any problems. Then, my wife tried to start it, the next day... and nothing. Now there are a few things to note. Lights seem to be at full power (but did try to jump it). All the shift positions are lit. Radio says "calibrate" when key is left in run position. When turning the key to attempt to start... a low volume "bump" is heard through the speakers. There is a after market starter, tried just simply un-hooking it. Still nothing, Put new (salvage yard) starter on. Jumping the solonoid produces the bendix noise... but no contact with flywheel.
100% stumped!
thanks in advance for your advice...
0
This discussion has been closed.
Comments
Cheers.