Are you an EV owner who has received a shockingly high quote for repairs? A reporter would like to speak with you; please reach out to [email protected] by Friday, May 26 for more details.

GMC Sierra Will not idle

gwhuntergwhunter Member Posts: 2
edited February 2015 in GMC
gwhuntergwhunter Posts: 1
February 16 edited February 16 in GMC
This truck starts will run as long as you float the throttle but when you stop it stalls emmediately. Here is what has been changed. The egr valve, map sensor, computer, fuel pump, iac, spark plugs, wires, distributor cap and rotor, had control module checked at parts store, ok, checked fuel pump relay with meter, bench tested oil pressure switch because of it's backup circuit to fuel pump, egr solenoid, back probed all sensors and relays for proper voltages, ok, checked tps ok, plenty of spark and good compression on all cylinders. If I put external vacuum on map sensor and hold my finger on the vacuum port I disconnected it from it will run. I'm not grasping what this is telling me. Any help at this point would be appreciated. It only throws a code 43 which is knock sensor. I haven't checked that yet but would that make it not run at idle. I can't keep it running long enough to try and drive it. Forgot to mention it is a 5.7 L.
Tagged: GMC GMC Sierra 1500 1995
Flag Quote · Like LOL
Sign In or Register to comment.