Are you shopping for a new vehicle and having trouble finding one, or have you been waiting a long time for a factory order? A reporter would like to speak with you; please reach out to [email protected] by Tues. 5/11 for more details.

Replaced shift solenoids, now no first gear or passing gears

t14harrist14harris Member Posts: 6
edited April 20 in Chevrolet
The other day, me and my dad replace the A and B solenoids, TCC solenoid and the 3-2 solenoid since I had a few codes for them. However, after reassembly and testing the transmission, it feels like it has no first gear or passing gears. We made sure that everything went back together the way it came out as well as cleaning up the valve body and transmission pan to make sure they were free of debris. This truck has the 4L60E transmission installed and has 220K miles on it. I will have a list of the codes it is throwing now uploaded in the next couple of hour. Please advise.

Comments

  • t14harrist14harris Member Posts: 6
    The only code that is appearing now is P0753.
  • thecardoc3thecardoc3 Member Posts: 5,427
    That's a 1-2 shift solenoid circuit code. That will cause a limp in strategy that results in only having second gear (all solenoids off).

    The diagnostics are pretty straight forward once you understand how the computer runs the test that generates this code.
  • t14harrist14harris Member Posts: 6
    Does that mean I have to replace the PCM or is there something else I should look at first?
  • thecardoc3thecardoc3 Member Posts: 5,427
    It means you need to test for power at the SS1 pin to the PCM under the above conditions. When the solenoid is commanded on you should see close to 0 volts and when it is off battery voltage.
  • t14harrist14harris Member Posts: 6
    Ok, I got you. Thank you for the help. Hopefully I will have this knocked out this weekend.
Sign In or Register to comment.