2004 Tacoma brake light socket replacement

6942cabinjo · September 2015

Passenger side brake light is not working. Bulb is fine. Seems that the "plunger action" in the socket may be lacking. I put some WD in there.....worked for a day or so....now not working. Can I replace this socket or do I need an entire lens assembly? Appreciate any help.

PF_Flyer · June 2019

Anything I could find on the socket, showed a wiring harness with all three bulbs, but also had a note that said, "Included with tail light assembly". So it appears that if a socket has gone bad, replacing the entire assembly might be the only option. Fortunately, they're not all that expensive

93tracker5spd · September 2015

Hello! Not familiar with that specific vehicle, but any socket that comes out of the housing can be replaced. When replacing it, put some dielectric grease in the socket before inserting the bulb to protect the parts from corrosion and rust. I do this with all electrical sockets and plugs. These can be purchased on ebay if you are an online shopper, and I am sure from a dealer most likely at a premium. One could also find a good one at a salvage yard and just take it out, should be very inexpensive that way. Good luck and a great day!

6942cabinjo · September 2015

Thank you 93Tracker. I should have been more specific. It appears that this socket can not be removed. I thought there might be a "secret handshake" to replace it.

2004 Tacoma brake light socket replacement

Best Answer

Answers

Helpful Tools

Most popular vehicles