Mitsubishi Mods

paisanpaisan Member Posts: 21,181
edited March 2014 in Mitsubishi
Mitsubishi Mods Discussed here!

Comments

  • 06eclipseowner06eclipseowner Member Posts: 3
    Anybody found any performance parts for the 2006 Eclipse GT yet? Other than a K&N filter (same part # as for 04-05 Mitsu Endeavor), I haven't had any luck yet. I'd really like to be turning at least 300hp. If anybody has found upgrade parts for the car, would you point me in the right direction?
  • Mr_ShiftrightMr_Shiftright Member Posts: 64,481
    Try these people. Give them a call:

    http://www.srmperformancecenter.com/index.html

    MrShiftright
    Host
  • 1racefan1racefan Member Posts: 932
    Are you familiar with any East Coast Mitsubishi specialists? I have an Outlander I would like to boost a little.
  • Mr_ShiftrightMr_Shiftright Member Posts: 64,481
    No but the West Coast guy might have ideas and may be able to ship you stuff. For the Outlander, you could start with a ram intake and a cat-back special exhaust system. This might bump you 15 HP or so, maybe a little more if you're lucky but it should give you that at least.
  • steverstever Guest Posts: 52,454
  • tbone45tbone45 Member Posts: 2
    I recently bought a 95 3000GT SL and since i barely ever see these cars around, I've recieved no advice on what is most worth doing to the car for my money. I would like to increase its performance so I was thinking about a cold air intake ect...what would you guys reccomend? Thanks a lot
  • Mr_ShiftrightMr_Shiftright Member Posts: 64,481
    Yeah if you found a decent CAI you might get up to 3-8HP for $200/$300.

    If you can get a larger throttle body plate that might give you 5 HP for $300---if you can find one for your car---might be tough.

    An exhaust header pipe would give you maybe 2HP, or 3 HP.

    A free flow muffler (cat-back) might give you 1 or 2 HP.

    That's about it for the "cheap" stuff...figure 10 to 20 HP for $1,000. That's not too bad.

    Otherwise you need to pretty much start taking apart the engine and spending lots of $$. At that point with a car like yours, you might consider just investing in a faster car, because your 3000 has a big weight problem, which is a tough issue to solve.
  • empiredjempiredj Member Posts: 21
    Outlander Parts -

    You might try JACOS

    Also try some local tuner shops that specialize in JDM parts. They should be able to get you anything in the Japanese Ralliart catalog.

    '06 DSM

    Its a chicken before the egg kind of thing. Currently I think AEM has a cold-air intake and I think Greddy might have an exhaust but so far that's pretty much it, short of adding nitrous.

    Greddy's turbo kit they showed at SEMA was said to be very close to production. So I'd say start calling and e-mailing them for it.
  • eclipseg2eclipseg2 Member Posts: 1
    Dear 06eclipse owner,

    Beside the K&N upgrade, Razzi has a bodykit for this model. Progressive and Tanabe will be coming out next month with lowering spring kits and Tanabe has a medallion exhaust kit on the way to. STRperformance has an assault bodykit for this car. Venom is working on a nitrous kit for the GT model should be out in a few months. Hope this give you some ideas.
  • ribeiromiguelribeiromiguel Member Posts: 1
    Please I need address where I can buy 2 wheels. Thanks for yours help.
    Miguel
  • Mr_ShiftrightMr_Shiftright Member Posts: 64,481
    You mean stock wheels?
  • loversmoon4u2loversmoon4u2 Member Posts: 1
    well ebay is starting to list some mods the best one i got so far is the INJEN SP1873 cold air intake system. watch the price thou i got mine on ebay for 80 bucks and 25 for shipping but the deals are out there. Greedy has work on bench for super charger belt driven like the nex gen charger for hyundai tiburon v6 that was a kick in the pants added 135 hp and the power was there all the time.
    mr grill make a billet grill for car and looks great had lots of comments on car since upgraded. :shades:
  • jczar58jczar58 Member Posts: 1
    I'm looking for a passenger side rocker panel moulding for my 95 3000GT SL spyder. Does someone know where I can get one at a reasonable price ? Thanks , Joe
  • crazydrewcrazydrew Member Posts: 2
    anyone know of a good aftermarket exhaust for my 02 Mitsubishi lancer OZ? ive looked and cant really seem to find anything plus i was hoping to find other ppls opinion on exhausts they have bought

    thanx
    drew
  • Mr_ShiftrightMr_Shiftright Member Posts: 64,481
    Try SRM Performance in California 415 454-7682
  • slicknessslickness Member Posts: 1
    Hi everyone, I have to 3000GT SL automatic. Everything is generally running fine, but the automatic transmission is in bad shape. I just recently bought a used japanese tranny and got it professionally installed. But even after they put the 2 sensors in the correct place, the tranny is still in limp mode. Which means it doesnt shift at all, and its always on 3rd gear.
    I need help to figure out the wiring for 3 wires (coming out of the tranny). Its a for a sensor, and the 3 lines were cut. So I need to know which goes where because the colors don't match. Its black, green/yellow, and green/black. The new colors are black, green, blue.
    Can someone help me? :(
    If you can compare the colors and the order of the lines coming from the tranny (left to right).
  • senorlobosenorlobo Member Posts: 1
    I recently bought a 3000 and want to buy lowering springs for it. But it came with the option ECS, I wanted to know if the springs will effect the ECS, or if i will just have to buy a complete coil over package?
  • cbarroncbarron Member Posts: 1
    I just installed a Magnaflow Catback exhaust yesterday on my 2003 lancer oz. At first you can't really hear much of a difference but once it warms up it growls. I love it, it's a nice low sound and not so loud like the huge dc sports exhaust.
  • bpkralliartbpkralliart Member Posts: 2
    Hey bro i just got a HKS 170mm Muffler Ti highflow exhaust put on my 04 Ralliart and it sounds mean i took it to a muffler shop and asked for 2.5" piping going back from the converter and they cut out the resinator and it sounds really good its cheaper too i think its a good way for u to go.
  • mex1canmex1can Member Posts: 1
    What up... im thinking about buying a3000 and i would like to know if there is a common prob. with the 95 series. just wondering. dont want to shoot myself in the foot... agian, thx
  • philsarsphilsars Member Posts: 2
    Hello,

    I'm planning on purchasing an Eclipse GT in the US, due to the very favourable exchange rate (roughly $8,000 CDN savings after accounting for the GST requirement at the border, plus customs levies); but apparently the US model doesn't meet Canadian bumper requirements (the intercooler can be damaged in an 8 km/h impact); does anyone know the approximate cost I'd be facing to bring the vehicle in line w/ Canadian bumper requirements?
  • steverstever Guest Posts: 52,454
    Check out the Importing Car into Canada from US discussion while waiting for responses to your bumper question. Especially the warranty posts.

    Steve, Host
  • gts_08gts_08 Member Posts: 3
    Hi everyone! I'm new here so i'm kinda still learning the ropes. I have an '03 Eclipse GTS and am thinking about putting in a K&N air filter. Will it increase the performance of the car? Thanks for any input.
  • liveandletdieliveandletdie Member Posts: 1
    Is there anything I need to know before I buy one?
  • steverstever Guest Posts: 52,454
    Check out the Mitsubishi 3000GT help discussion too.

    Steve, Host
  • rrm18rrm18 Member Posts: 1
    i own a 2006 eclipse gs and was wondering if any one has come across a bolt-on kit yet, or if you have heard of any developments of a turbo kit. my car is set up for a turbo and ready to go. its just a matter of time now.
  • Mr_ShiftrightMr_Shiftright Member Posts: 64,481
  • woodchuck6woodchuck6 Member Posts: 2
    Hi. I have a 1996 3000GT non-turbo. I would like to add a twin turbo sytem to it and was wondering what i would have to do to the engine(if anything) so it could handle the turbos. Also what a good site for Turbos.

    -Woodchuck
  • alexschmidt6alexschmidt6 Member Posts: 1
    i've been considering throwing a Venom 400 chip in my new baby, basically looking for a relatively cheap upgrade with maximimum horsepower, any suggestions? and is $299 a good price for it?
  • crazydrewcrazydrew Member Posts: 2
  • jntowiejntowie Member Posts: 1
    My dealership in Edmonton gave me some sites:
    link title
    link title
    and link title
  • danharrisdanharris Member Posts: 9
    I would go out and buy a 6G72DETT from a used jdm engine supplier along with the tranny and ecm.. It would be probally the cheapest way to add a turbo charger to your car.

    Dan
  • woodchuck6woodchuck6 Member Posts: 2
  • paisanpaisan Member Posts: 21,181
    I'm gonna have to agree with dan on this engine, ecu and trans.

    -mike
  • roiroi Member Posts: 2
    hey i m planning to buy 06-up Mitsubishi Eclipse Halo Projector Headlights /w LED (Pair)Black but i m looking for stores that carry this product and i live in Toronto ....if n e one knows bout this headlight let me know
  • shaggy3000gtshaggy3000gt Member Posts: 1
    I have a 96 3000GT with a strong engine and new trans but would like to get a little better throttle response/initial acceleration. Are there any easy relatively inexpensive modifications that could accomplish this? K&N filter?, cold air induction, cat back exhaust etc. Will any of these make any noticeable changes? Thanks
  • Mr_ShiftrightMr_Shiftright Member Posts: 64,481
    RAM air, rather than cold air, might give you better throttle response on the low end. A K&N does nothing but make noise unless that's coupled with intake mods of some kind.

    I'm not sure about a larger throttle body. I hear all kinds of conflicting data on that...
  • paisanpaisan Member Posts: 21,181
    Actually a K&N will give you better throttle response and combined with a CAI will also help. Horsepower gains on the other hand are better accomplished through CAI + K&N + Exhaust modifications. Essentially you are allowing it to breathe and exhaust air and fuel faster and therefore increase your HP, if you only do half the equation you will only gain in throttle response.

    As for RamAir, that is not something easily or cheaply accomplished in the aftermarket and essentially doesn't really help a whole lot in terms of HP. Forced induction (Supercharging or Turbo) gives significant HP gains but are very expensive to do correctly and often involves a lot of modifications to the motor, cooling system oil system and sometimes the body of the car itself.

    -mike
    Motorsports and Tuning Host
  • tbone45tbone45 Member Posts: 2
  • eclipseboi4ueclipseboi4u Member Posts: 5
    hey i got a website for performance .... go to www.autocityimports.com they carry everything from flywheels intakes exhaust strut bars antisway bars to nitrous systems i already got a full magnaflow exhaust and injen cold air intake take my advice and if u want to juice up the body they even have a body kit .
  • eclipseboi4ueclipseboi4u Member Posts: 5
    go to www.autocityimports.com they carry the headlights ur looking for if u want a more aggressive look get he halo projectors with some eyelids it looks hot
  • eclipseboi4ueclipseboi4u Member Posts: 5
    i called a greddy and they are yet to make a turbo for all of the 2006+ eclipses :( how sad right but i know where ya'll can find parts for any import jsut email me @ tohagg1011@aol.com
  • eclipseboi4ueclipseboi4u Member Posts: 5
    ok upgrades there are a ton!!!!just gotta know where to look a good we site is autocityimports.com great web site a turned a 162 horsepower stock in to 200horsepower eclipse but iam still doing bolts ons yet to find a turbo what i can recommend is to cutom build ur own a great perfromance upgrade is to a nitrous kit which will give u about 100hp if u know how to use it and thats not consitant that for about 3-10 seconds NX makes a great on and Zex makes the best i ahven't used one on this ride yet but i used one on my 98 camaro supercharged with a 75 shot and my 95 neon (with eclipse V6 motor swap) with a 50 shot and good gaines but be careful b/c it can blow ur motor ... so any parts u need i can find them hit me up @ tohagg1011@aol.com
  • eclipseboi4ueclipseboi4u Member Posts: 5
    GREDDY is supposedly making one u can get one custom made for about 3k to 5k now they do make a supercharger for this amazing ride but like all applications be careful ... a bolt on kit for for a turbo is yet to be released even though greddy made a concept for the 2006 GT it isn't released yet! why is beyond me ya know eclipse is a pouplar car so plan in a year or so they will have so many parts it will be crazy but if u want some great bolt on parts email me @ tohagg1011@aol.com
  • paisanpaisan Member Posts: 21,181
    eclipseboi, please do not advertise on here as it is against the rules. It's great to provide information but selling here is against the rules. Thanks.

    -mike
  • vanoochkavanoochka Member Posts: 3
    I bought a set of projector/halo lights from an ebay seller named "assembleweb" and they are really great. With about 5 minutes of grinding work with my dremel tool, they also adapted to my HID bulbs and look super.

    Don't know if he has them in black, as mine are chrome, but you can search ebay and see. There are lots of sellers of lights there, but this guy shipped fast and the quality is excellent. They have been in my car for a couple of months and I have had no problems with moisture or anything else.
  • vanoochkavanoochka Member Posts: 3
    Does anyone know of a short throw shifter that works with the 06 Eclipse GT 6 speed?
  • 06eclipseowner06eclipseowner Member Posts: 3
  • vanoochkavanoochka Member Posts: 3
    There are a lot of arguements for and against this product by actual users of it, but if you read the instructions and look critically at the wiring diagram you see that basically this thing just fools the ecu into a wide open throttle mode. It may "feel" good, but doesn't really do much.
  • sugethagreatsugethagreat Member Posts: 1
    I need to find some upgrades for my Lancer. Does anyone know where I can find them
This discussion has been closed.