By accessing this website, you acknowledge that Edmunds and its third party business partners may use cookies, pixels, and similar technologies to collect information about you and your interactions with the website as described in our
Privacy Statement, and you agree that your use of the website is subject to our
Visitor Agreement.
Comments
http://www.fairhondapartsforyou.com is great, they are an actual dealership in Danbury, CT. If you are local you can just stop by and buy the parts for the same price as website, they also give you the same discount on parts not listed on the website. I liked them so much that I even bought my previous car from them. Unfortunatley, I no longer live in CT :-( But they remember me, and don't charge shipping to send stuff to me anyway.
All you need a VIN number to order/make/program a key at the dealer. Thievs know that, that is why NY press suggested at one point to cover up the VIN number with a piece of paper, but NYS registration lists VIN number on it as well. The reporters were able to get keys to police cruisers and took them from the precinct, with the weapons inside! Allot of dealerhisps require proof of ownership, such as registration to make keys, but some still don't. Same applies to the security code for the radios, anyone can get it from a dealer.
So, if you are in a state that does not list VIN number on the window sticker, and a locaiton of high car theft, cover up your VIN plate with a piece of paper. Problem with CR-V is that it does not break down too often, so I doubt there is a big market for used CR-V parts.
Phil
Except for the news a few months back that the immobilizer chips are relatively easy to "hack".
Can you provide a URL? I'm interested...
Can you provide a URL? I'm interested...
http://rfidanalysis.org/
Quoting that site:
"Only careful experimentation will permit accurate assessment of the degree of these two threats. Our cursory experiments, however, suggest that the threats are well within the realm of practical execution."
It has always been true that a professional thief can bypass almost any security system. However, I hope they move to 128 bit encryption in the future.
Most of the places I look online only have 'saddle' for a light color choice.
Specifically interested in good floor mats, and the armrest compartment.
Thanks,
Dawn
Also, when I first started building and pricing CRV;s, there was an option for an under the seat subwoofer. I put an aftermarket system in an X-Terra with 10" subs, but want something that takes up a lot less room for the CRV. Now I can't even find the under the seat subwoofer as an option on the build and price sections. Where they removed? I think I saw a post saying they wouldn't be available until Sept, but if someone could share some insight with me, I'd appreciate it. Both on if this under the seat thing is as good as it sounds, worth the price, available or other options. I do tumble the backseats a lot, so I don't want to put something back there that takes up a lot of room.
Thanks in advance for any input, and congrats to all those other CRV owners out there.
:shades:
Avoid any FM modulator hook-up with a Honda stock radio because Honda's FM radios are terrible. If you're going to get Satellite radio you might as well make sure it sounds good!
As for the XM, I like the sponsored site prices MUCH better and will order there. Their accessories are amazingly discounted, why was I thinking of only buying through my dealer?
Of course, I can't put on side steps or front grilles, so if I buy them there, anyone know if my dealer will charge me labor and put them on for me?
I still LOVE my CRV, I haven't washed a car this much ever!
What should it cost me and does anyone have experience with the vehicle pulling this?
Thanks
What should it cost me
I assume you mean 2005 CR-V SE, as the 2006 models won't be available until the end of the year.
The H and A Accessories sponsor link at the top of the page lists the trailer hitch for $189.60 plus $47.27 for the wiring harness. The Honda list price on the "build and price" option on the Honda website is $326 (hitch + wiring harness). H and A also has the installation instructions available so you can decide if it's something you can install yourself.
Good luck.
Hope this helps
Rosemont
Any suggestions?
First problem - the 1st Gen CR-V didn't have an immbolizer chip.
The second problem is that the metal portion of the 2nd Gen CR-V key is completely different from a 1st Gen CR-V key. They are not interchangeable and not compatible.
FYI
So this isn't a problem, then right? Wouldn't have to remove the chip at all.
The issue is the actual keys aren't compatible... Would have to swap the key components... might be a bit tricky. I'll post if I ever figure this out.
Thanks for that info, theracoon!
Here's a picture of the disassembled Accord key (from the link that isn't there anymore). Doesn't look anything at all like a 1st Gen Key.
The 1st Gen key plastic is molded to the metal. You'd have to cut the plastic off of the metal portion even to see if it's close to matching the key. The 2nd Gen remote entry/key combination is about US $50, which you'd have to spend before you even know if the remote will work with the 1st Gen receiver, and then you'd have to destroy one of your 1st Gen keys to see if it's even possible to swap the metal key portions.
Good luck.
Thanks!!
Thanks!!
Try here, it is $161 shipped!
http://www.drivah.com/marketplace/product_info.php/products_id/305
TerryV14
TerryV14
The manual refers to the weight sensors in the seats for the airbags. Honda says that if not attached the mats may roll up and touch the seat affecting the weight read out.
You could simply punch holes in the new mats in the same places as the OEM. This was they will attach to the floor mounted hooks, already in place.
P.S. I thought EX's came with floor mats from the factory, mine did.
WARNING!
I saw a guy with a Saris spare tire rack on his 05 CRV. We talked with him and went to buy one at the bike shop where he bought it. They told us that the CRV rear door doesn't support the weight of a rack and bikes. You could damage your door!
Since you had the receiver installed flush with the vehicle (to avoid brused shins when the rack isn't on -- a very smart move which I would not have thought of), did you have to get the extender piece to hold the rack farther away from the vehicle?
Also, when the rack is not in use and is folded up, does it reach up high enough to hit the spare tire, or does it fold under it?
Thanks!
Thanks
Also, has anyone had much experience with the sunroof / window deflectors you can add on to the car?
Terry
Yes, the rear cargo area changed with the redesign of the CR-V for the 2002 model year.
Why not get a Honda Cargo Tray? The HandA-Accessories.com link at the top of this page lists the Honda Cargo Tray for $75.60 for your 2005 CR-V. The one you were looking at is $99.
The two I have seen so far that would work are:
http://www.honda-parts.net/honcrvcarmat.html
http://www.hondapartsdeals.com/product_info.php?pName=cargo-tray-crv
The one has a lip and the other is flat with a nice raised letter CRV.
Terry
Thanks,
Ward
Yesterday, I contacted several buyers of '02-'05 CR-V roof rack crossbars being sold on eBay by "importonly." I wanted a few opinions of the crossbars before I bought (all were good, BTW). Anyway, one guy wrote me back and mentioned something about installing the bars that I think answers your question:
"...I should tell you that regardless of after market or OEM you might have to clean up the paint in the threaded holes in the roof where your new roof racks will bolt up to. I did that with a M6 x 1.00 metric tap (not provided) You might be able to install the screws without but it could be dificult...."
Hope that helps.
I have bought from "importonly" while the stuff he sells is quality. It is not Honda OEM. He claims that it is made by the same company that makes OEM, but without Honda's endorsment.
As to the roof rack install, if you click on the sponsor link on top, follow to the roof rack installation, it looks like HandA added the same text in there as well.
Honda doesn't make a cooling system add on specific to the CR-V for towing. If a dealer is recommending an add-on towing package it's something that dealer has created.
A transmisison cooler isn't a bad idea if you're going to be doing a lot of towing of heavy trailers, but you can find one for less than $200 and have it installed.
$2,000? Outrageous. The trailer hitch list price is $261, the wiring harness is another $65.
Has anyone had experience installing these screens? The Cloud-Rider FAQ for install mentions custom clips, brackets, thumbscrews and locknuts.
The picture of the screens states drilling for installation is needed. Can anyone tell me the amount and difficulty of the drilling required?
Thanks for any assistance.