Chrysler 300M

fastdriver

ruski-

"Some people are complaining there that TL-S is not as quick when accelerating past 110mph. Since you have a CL-S which is pretty much the same as TL-S, do you have such impression?"

LOL.... despite my screename, I do not drive this fast. I want to stay around a while longer despite all this terrorism.

"And how does it compare to your 300M in that aspect?"

Never went that fast in Christine either. However, I can tell you that there were/are times when I was getting on I-95 that I did floor Christine and the CL-S. The difference- Christine sounded like the engine was going to fly right through the hood. The CL-S- just like our RIV- quiet, nice little roar and ZOOM, you're gone!

"They also complained that slight braking from triple digits does not feel comfortable as the rear end feels squirrelly. Any experience with that?"

Again, can't help you there either. I would imagine if the car felt "squirrely" that the VSA- vehicle stability assist- would kick in?

Off topic for a second- I know you don't drive on I-95 much, but when you have, have you seen US Flags displayed at overpasses? Here in CT almost every overpass on I-95 has a US Flag on the fence up there both Northbound and Southbound. Fuzzywuzzy- same question.

easyrider300m-

On October 4th I received an e-mail from Sal that said the Z additive should be out in "45 days". That would make it around November 18-19th?? I can't wait!

fastdriver

silverbullet4

Welcome to the board-There are many knowledgeable owners on the board who can give you advice on just about anything related to the M. Some have purchased the service manuals for reference. I would add my endorsement for all Zaino products:
Polishes, leather care, tire gloss, clay bar-it's all first rate. I have a 2k bright silver with 5 or 6 coats of Zaino Z-2. The car wash product has a little wax in it and restores the glassy shine. Be sure and follow all directions, especially the advice on what kind of toweling to use.

Silver

sdmike2

When I went to the DC site two weeks ago they had only two interior colors listed for the '02 M. I'm glad that they didn't get rid of sandstone...it's my favorite.

avalanche165

hey bro sry about the chat session that one nite...
anyway, from dealer i mean the mats are $40 a piece. so i think its viable that we can go for like $75 for better qualilty, perfect fitting, AND custom embroidered logos. personally i cant get'em cuz i'm gonna have one my mats in the back embroidered with all the companies i've used and the other one with names of ppl who have helped. this will include all of you btw
and cant forget my ghetto yahoo crew

avalanche165

hey kool nice car
i'm lookin for some paint to take care of it. just that outer lip i wanna chrome or something, i HATE that rust, it just annoys me so much. it might as well as be on my door thats how it feels lol. anyway its just that, that lip get so incredibly hot, but i've seen it done many times over in mags. pick up a lowrider mag, every car has it doen, but whether those cars are daily drivers or even driven at all is the question....

sdmike2

Remember what happened last time you messed around behind your wheels. I seem to remember you making a mess of a brake job.

fuzzywuzzy

I did take I95 last weekend to South Beach. I didn't see any "flags" from the overpasses.

fuzzywuzzy

Even the cross drill rotors I have do this. They were "suppose" to have some anti rust coating. I guess it either wore off, or didn't do it's job.

sdmike2

Every overpass in San Diego has one or more flags and patriotic messages on them. A lot of them are "woven" into the chain link that lines many of the overpasses. Many are very ornate. You think Florida is disallowing posting on the overpasses? Seems like misplaced policing if that's the case.

sdmike2

So, what do you club members think of the hats? Just curious. Also, if there are other clothing items or accessories that you think would be popular club items just let the prez know. Clearly we can't make onsies and twosies of things, but if we get enough interest in specific items we can see about providing them to club members. One thought might be sweatshirts given the upcoming winter season. Again, just let Roger know if you have any ideas.

denverm

The hats look nice, but I'm not much of a hat person, particularly the adjustable ones (a fitted baseball cap in about 7 3/4 works OK for me). I'd maybe like some insulated stainless travel mugs, the tall ones that would fit in the cup holders, with a painted club logo.

300michael

I finished putting on the last touches of my Alpine 852A Navigation,and my TME-M790 flip up 7" screen. The system is very sweet. I did have to locate it in the empty section below the radio, because the top section (where the climite control is not deep enough) I have to start seeing about upgrading my insurance now.
My cousin, and sister were a little worried watching the plastic fly as I was using my dremel to grind down the front fesha. Although I think they are seceretly purchasing DVD movies now, to watch on it.

guesswho1

Sweeeeeeeet!!! so where are the pics?

ruski

we don't really have the same kind of overpasses here in FL. There are some places where one highway goes above another but no one would go there to put any flags.

sdmike2

Cool! I hope you took "during" and "after" pics for us.

easyrider300m

here is a site for Chrysler 300M parts including replacement mats--both rubber and carpet mats---the carpet mats are $49 for all four mats---heavy rubber (perfect for New England Winters) are slightly higher--check out the rest of the site for other parts for the M

http://www.chrysler-parts.com/PP.asp?PID=15

I think just the front mats would be fine for logoed mats via the 300M Enthusiasts Club. The rears are usually not used as much and therefore don't wear and are not really seen much. If possible, I would like to see heavier plush carpet mats offered by the club with a nice 2-color 300M logo---just the fronts would keep the cost much more reasonable---


Whatdya think
EasyRider300m

PS: any of you newbies are missing the boat if you don't join the 300M Enthusiasts Club---great shirts, hats, club meets, cameraderie, and knowledgeable helpful members: no excuses: So become a "made" member of "This Thing of Ours"--join today- http://www.300mclub.org/

nmifr300m

Hi from New Mexico, Here the state is in a two year project rebuliding the I-25, I-40 intersection. Got several US and New Mexico flags up and one hanging off one of the new high bridges that must be batallion size. Several flags dispalyed between Abq. and Santa Fe.

Hats look great, I'll order one of the white ones as soon as they are on the page.

Like the idea of floor mats with some 300M logo. Do they make the back mats bigger?

Does anyone know what elements went into the Dual Exhaust on the 2002 300M special. I noticed that Brola is no longer carrying the single pipe system they had and they have not yet put up any other option for the 300M.

phases78

pics pics pics!!!!!!!!

p.s. could you post some pics?

phases

http://phases78.homestead.com/300m.html

easyrider300m

How bout some nice navy blue runners pants with "Chrysler 300M" printed in big bold letters down one pant leg--

Another suggestion for the year 2002: How bout a nice full color calendar with 12 pics of the best M's of our club members---bet we could get them for a reasonable price with a club order of a couple hundred calendars-- featured M's would be those owned by Avalanche, Hemadog, Dubz, 300Michael, Rogor, Fuzzy, Guesswho, Phases and others yet to be mentioned---some photos could be a split showing the exterior and custom interiors--female models next to the M's are optional

I bet this calendar could even be made in-house seeing some of the best graphics designers are amongst our members (DrPixel, Denvern)

Whatdya think
EasyRider300M

sdmike2

every year we make a family calendar that includes pictures related to each month from the previous year (e.g. October is usually a halloween picture). However, the pictures aren't great when Thrifty or Costco gets done scanning, enlarging and printing them, and they're very expensive (something like $20 each). My color printer can do great photos, but doublesided photo paper and print cartridges are expensive too. So, unless someone has a better way of doing it I think it wouldn't be feasible to run something like this. Actually guys, any ideas should be passed on to Roger. My role has been to take care of the dealings with the embroidery company which is based in San Diego.

Oh, my local grocery store is selling very large RC PT Cruisers (Inferno Red) and VW Bugs (yellow) for only $69 each. They seem to be pretty quick and have full left/right forward/reverse controls. I'm sure for only $69 they're not great quality, but hell, the things are like 30 inches long! I wish they made a 300M. )

scotian

http://albums.photopoint.com/j/ViewPhoto?u=1280646&a=13869011&p=55201657&f=0

300michael

and, will be adding more. Just use the clubs site to link up. (that should help generate some traffic there)

fastdriver

fuzzywuzzy & ruski-

Thanks. I was just curious. I know the overpasses on I-95 in FL are different then here and not as numerous, but know that there are some. Many are walkways. Just thought that someone would have put up some patriotic message.

fastdriver

PS Even I would be interested in a 300M calendar with members' cars featured- especially sdmike2's!

ruski

I think if there is a walkway overpass in south Florida, it must be in a ghetto.

sdmike2

ok, I give. What is it?

mikeyjohn

I think it's a secret military map. I don't want to give out the secret location but I think Bert knows. LOL

mrl859

It's a sewing pattern for the right boot and lower leg for a transformer Halloween costume:)

ed12

Keep your eyes open. There is a 300M special cruising around the New York area as of today. Obviously, it was not sold through a dealer as they are not at the dealers yet.

Ed

intrepidspirit

At the end of your post #9774...

"PS Even I would be interested in a 300M calendar with members' cars featured- especially sdmike2's!"

-- Which only goes to prove that you can take the driver out of the 300M, but you can never take the 300M out of the driver...

scotian

Nice guesses, but it has something to do with the M...

phases78

nice pics! im jealous!!! (how much did all that cost ya buddy?)

http://phases78.homestead.com/300m.html

phases

fastdriver

intrepidspirit-

YEP! I have often said that I STILL turn and look when a 300M goes by me, especially if it's red and shiny! ;-)) I'm just glad that it's not registered to me. I can still like the looks.

ruski-

Aren't there walkways near some schools? Maybe I'm dreaming. I know I wasn't in the ghetto.

fastdriver

jona57

I wish to tap that vast pool of automotive knowledge contained in our 300M club.

1. Does anyone know where I could download "Rev's vs HP" & "Rev's vs Torque" curves for our 3.5L? Some Dodge Intrepid R/T sales literature contain rough curves, but they are not for the 3.5L in 300M tune.
2. Are off-the-line acceleration times using Autostick mode faster, or is it just my perception? I have not measured this on a track, but it seems I can get closer to that 6400 rpm (max horsepower) level prior to upshifts if I use AutoStick mode. (I know passing acceleration is better because AutoStick avoids that momentary lag in downshifting when puttin' the hammer down in 'D').
3. When will those hats be available for Club members, Rog? I gotta have one!

Jon

300michael

The Nav unit cost $1100 amd the vidio unit was $900 off of Ebay. I emailed both sellers with questions. Both units had no bidders One of the sellers Emailed me and asked if I was still interested in it, and I emailed the other seller for a lower price which they accepted. Both were brand new in the boxes. I figured that was what the Acura system cost and it was total of $1600 off the list prices.

300michael

Question #1 I do not know.

Question #2 Even on "D" mode my M gets above the 6000 rpm line when accelerating hard. If done properly it can be, if not it will worsen times. Of course you can set it in auto stick mode and leave it the the car to over ride it for the shifts.

Question #3 Enquiring minds want to know too.

nmifr300m

Ok Scot,

My vote it is a cut and fold pattern to make a new air box for the 300M. How about adding a deminsion. Is the the box right before the throtle body?

sdmike2

ok, I even cut it out and tried making something with it. The closest I got was a teenie, tiny futuristic mouse piano. Actually, I second the vote above. Although I'm not sure exactly what its final form is, it appears to be taking the shape of an airbox for a cone filter.

sdmike2

The hats should arrive at club HQ in the next couple of days. I'm sure da prez will make an announcement shortly thereafter, once he verifies the quality/quantity.

-M

easyrider300m

just checked out the club page and noticed that we now have 183 members---almost every state is represented including Alaska and Hawaii--also 4 other countries are listed---

Just wondering why Dieter is not listed as a member----and has anyone contacted him to be a guest of honor at one of our chat sessions?

Looking forward to getting the club caps when issued---nice job sdmike and others responsible for logo design , style, colors, etc... just another reason for non-members to become "made" members of "This Thing of Ours"---- http://www.300mclub.org/

EasyRider300M

avalanche165

the clock/vent pod on top of our dash, i made a fiberglass piece out of it and molded in a 6.4" screen. the vents are still functional, and the screen will plug right into the existing harness for the clock. the piece will fit right into existing housing. no modifications at all. has one Video input for yoru choosing, mine will be a gps hooked to my labtop then teh s video into the screen. you can run a dvd player, vcr, ps2, nav system. i did this becuase i dont like the flip screens covering the ac controls. i will have pics of course, right now tweaking it out to fit perfectly, so tuesday or wednesday will have pics. i would sell this as a kit, with the screen. so all you do when you get the box is pop the old on out, plug in the harness, and pop the new piece in, and wha-la, a custom molded 6.4" screen that looks factory. paint will match our interiors as well. so whadda think? i shouted this out on chat one nite, hopefully i'll have pics by this wednesday's chat session..

bigmike5

SDMike--The hats look pretty good. I like the black one the best and will be ordering from Roger once he posts on it. But, how about an alternate, not so busy hat with just the "300M" in those slanted, and maybe raised, NASCAR letters on the front?

Our Sunday newspaper had a Chrysler insert similar to the ad in the magazine with the products lined up next to each other all in silver, but this time they showed a side view of the Chronus below the other vehicles. Man did it look great from the side. Had only seen it kind of from the front side in the other ad. Got to make that car if they drop the Hemi.

I asked about Dura Lube products last week but no one commented. Has anyone used any of their products and what results?

fuzzywuzzy

I'd say it's the 3m clear bra after taking it off. I heard it comes off in pieces sometimes after it's been on for a while.

mykem

Ow!

Traffic had come to a stop on the highway.

I stopped in time.

The Explorer behind me, stopped barely in time.

The Saturn behind the Explorer, didn't.

There must be a bunch of damage under the bumper. The license plate light is buried way in there. The lower trunk lip is bent. My license plate is bent. But all in all, it's not an eyesore. The rubber bumper remolded itself back into shape. But it has scratches on it -- it's better than the old days with Chrome bumpers that wouldn't pop back.

The Explorer and I came out with a lot less damage than the Saturn. They came away with no headlights and a hood in the shape of the letter A.

Fortunately we call came out of it relatively uninjured. Although the passenger in the Explorer was complaining of back pain...

-m

koolk300m

Thanks guys for all the helpful info on owning a 300m. I am placing an order for my Zaino products today. How long does it normally take for the product to be delivered.

Also, I appreciate the info on tire pressure in order to make ride softer. I am definetly going to check this out.

I have already had my 300m tinted and added a sunroof deflector. The last mod I plan on doing is adding a spoiler and one day more woodgrain.

Thanks for info and I am also considering joining the 300m club--would not mind having embroidered floormats.

Finally, I am from Mississippi and I got my 300m in Jackson, MS for about $7,000 off sticker but I was dealing with some negative equity in my trade so in order for deal to be made, they had to be flexible. Also, it was the last 2001 300m on the lot and they had not got in their 2002 models yet.

ruski

I bet the person in the Explorer did not even feel that impact.

drpixel

hope you all had a good weekend--why is the weekend the quickest 48 hours in the world?

sdmike2: NICE hats....nice logo, too! Don't recall the price on these babies, but no self-respecting Mer should be without one! I, too am partial to the black one!

Those of you who remember back to the beginning of this year I had to have my cat Shadow put down. It has been a sad nine months, but recently a white ball of fur has entered into my and Linda's lives and brought some happiness with her.

 A stray cat-about 7 months old--whom we were feeding has adopted us, and we found out later on that she was with kittens!

Her name is Angel and is an extremely friendly and affectionate cat. She gave birth to 5 kittens-4 males and one female named (according to the family portrait you can see:

black and white #1-female: Domino, black and white #2-male: Tuxedo, white w/black patch on his head: Toupee, all white male: un-named, Gray and white male: Sebastian). The kittens are three weeks old and all are healthy and have adopted parents waiting for them!

 A while back, Easyrider mentioned that maybe in a while we'd find someone to take Shadow's place for he was such a part of our family. Little did we know it would be so soon!

Once she's done nursing the kittens, we'll take her to the vet for an exam, neutering/spaying (?), shots, and whatever else needs to be done. It will be good to have a pet around again!

http://www.shutterfly.com/my/osi.jsp?i=67b0de21b3187f8ce4ff

Regards from New YOrk,

Doc

rogor2k

We should have an order page up on the Club web site soon, but here is the line on pricing.

Hats will be $12.50 for either color. Priority mail shipping will be $3.50 for one hat and $1.50 for each additional hat.

Bottom line, one hat will cost ya' $16 bucks, two hats will cost ya' $30 bucks.

Someone (bigmike5??) mentioned a more generic 300M hat. There is one available, should be at your 5* if they carry apparel. I have one and I'll post a pic if I can remember to take one. It has the 300M badge and the Motor Trend Car of the Year calipers combined into one graphic. I think it cost me around $18.

bigmike5

Roger--I think they had a hat like the one you describe at the Chrysler museum, but I missed that part of the Dream Cruise trip, and so I will have to get up there next year to see what they have.

Glenn--Good thing you do not live close to KY. My wife would be after one of those "fur balls" in a NY minute. Our present two are both tortoise shells and one has only 3 paws. Crushed one paw in a carwash--and no, she wasn't driving thru with a paw out the window of the M. We got her about 2 months ago, after she had the paw amputated to the shoulder and was rehabing. She is incredibly fast on 3 paws and I nicknamed her "velocokat." I'll send you a photo off line.

scotian

Correct!

I'm still waiting on a longer engine breather hose, so I haven't run with it yet, but here it is so far. What do you all think?

http://albums.photopoint.com/j/AlbumIndex?u=1280646&a=13764864&f=0&sp=1

drpixel

sdmike2: what a story....all the kittens are spoken for...but if anyone backs out..how many stamps does it take to mail a cat?!....

Tornado....recently I've been seeing something called a 'Tornado' on one of the infomercial channels in Joisey. Apparently some kind of device that alters the path of air coming into an engine with some sort of 'angled fins' which are within a circular ring. The theory is (keeping in mind I'm no rocket scientist...) that the air coming INTO the engine through the air intake is 'spun' kind of like a vortex and therefore enters the engine faster (?). They had some kind of dyno thing they had the vehicle on. Supposedly the vehicle showed a 20 HP increase. I thought that the 'blades/fins' actually turned but they seem to be stationary.
I know, I know..if it sounds to good, etc. Available for the unbelievable low prive of $75.00?

Okay, turn the flames on...all this after seeing scotian's lexan custom airbox.....

Doc