By accessing this website, you acknowledge that Edmunds and its third party business partners may use cookies, pixels, and similar technologies to collect information about you and your interactions with the website as described in our
Privacy Statement, and you agree that your use of the website is subject to our
Visitor Agreement.
Comments
tpmiller1 - oops... the picture of the gullwing tonneau in the brochure shows the bedliner (or a mat) under the tonneau, BUT doesn't show the 'lip' of the protector going over the tailgate cap. May have to trimmed or use the tailgate mat product in conjunction with the under rail liner (expensive) to pull this off. It may be just as well to use the spray-in liner, unless you're like me and need to haul washers / dryers and refrigerators around more that occasionally.
I agree that many are 'looks enhancing' without being hugely practical, but many are designed for working. A lot depends on how force is applied to the push bars - if you are pushing gradually or pulling gradually (with a winch say), there is no problem - a sudden impact will cause more damage. Same principle as putting a nail in wood - apply pressure to it and nothing happens - hit it hard and sharp and it goes in.
PS-- Next dilemma is turning in my 1997 4x4 Tacoma. Friends are telling me to try to sell it, rather than just turn it in at the end of my lease when my Dakota comes in. Supposedly Tacomas resell really well and I could probably make a few bucks on it. Anyone with any experience?
PS-- Next dilemma is turning in my 1997 4x4 Tacoma. Friends are telling me to try to sell it, rather than just turn it in at the end of my lease when my Dakota comes in. Supposedly Tacomas resell really well and I could probably make a few bucks on it. Anyone with any experience?
By the way, I have a 94 SLT ext.cab 4x4 with 83k and I've had <average luck with it. Defroster problem since day 1, replaced u-joint (48k), radiator (55k), and front axle seals 4 times. (yes, 4!!) The front axles were also replaced the last time too. Fortunately, the first 4 times were covered under the 7/70k warranty, but they're leaking again and it looks like it's all me this time!$!$!$!$
I now have an electrical problem with the steering column wiring. Several weeks ago, I set the tilt wheel at the lowest position and the heater fan and power windows quit working and the air bag warning light came on the moment I locked it in place. I've practically torn the dash apart trying to trace wiring, but to no avail. Any help would be appreciated.
the tailgate cover rubbing the paint off on the
outside edge of the liner, i am still bickering
with them, the warranty states that they do not
cover paint scuffing and scratching in the bed,
hahahaha this is outside the bed, so they are
looking into the technicalities. i know a few
people that have had theirs scratched, anyone else?
robert
have it back tomorrow, also getting 2nd oil change
and tires rotated. since its there i am having them
go over all tsb's and also over the brake system
i.e. rotors and so on, ya never know.
robert
Bookitty
Ordered mine on 12/28
Built today!
Go out the door tomorrow (pending no problems)
Have it in 10 days or so!
good luck!
4.7 whisper down the road and roar when i ask it,
and its all thanks to (houtslaw), that tsb fixed my
ticking and my truck is so quiet i cant believe
its the same truck, the dealer was so confused that
this would actually work, but whammo, ticky gone,
ticky gone gone.
the tsb is for trucks with the 4.7 made before nov
23rd 1999, so go get this done now, it will change
your whole outlook on your truck.
robert
hope this helps LOL....
robert
I have a question for FINALLY! You said that you ordered your quad cab on 12/28 and just got word that it has been built and will be shipped soon. Did you order 4X4 or 4X2?
I ordered a 4X4 SLT QC with just about everything except 4 wheel ABS on 1/7/00 and I am getting anxious to hear that the restrictions have been lifted. Now that bookkitty has learned that his truck has been built, he doesn't talk about the restrictions like he used to.
:'-))
later, Jason
Would like to hear,
robert
Bookitty
I did order the lsd and tire and handling group with the 4.7l engine. I also am adding an under the rail bed-liner and the six-disc CD player. I am also thinking about some sort of cover for the bed and the chrome tube running boards. I was hoping for an earlier build date because the pre-paid lease on my Explorer runs out on March 7 so I will probably have to extend it for a month or two which will cost me some extra $$ so I will probably try to get some sort of extra deal on my QC. I did not get the full time all wheel drive either. I have it on my Explorer now and it is nice but after driving a 2wd Dakota with the 4.7l engine, and having a little fun, I decided that it would be nice to actually be able to spin the wheels again :>
The first Ford Super Crew F-150's just started arriving around here and I drove one last Saturday just in case I couldn't wait on my QC. It was nice but was much bigger and definitely was not as much fun to drive even though it had more horsepower. I think that Ford has more comfortable seats but I think will stick to my QC.
Enough for now.
P.S. Quick question. Do they have a Dakota plant in Mexico?
I also drove --guided?-- the SuperCrew a week or so back (actually two of them; Black, White) and had already ridden in one at the Firestone test track in Ft. Stockton, TX in Dec. My impressions were the same as your's - I really thought the seats were great, and gave a post to the SuperCrew Topic about the Dak. Quad / SuperCrew comparison. Friendly bunch over there... But several of them think their seats are 'not supportive.' Think they might swap with us?
Any ideas out there? Must have been done before with a module / light switch in Canada where I ran into dtrl's in the early 90's on rentals.
I was looking for the same idea as the s-10 and Cherokee that they come on automatically when it gets dark. I don't know why they don't have this feature in the Durango/Dakota.
Ill see if i can find out about the daytime lights though.
There is a specific warning about the magnesium valve covers in the service manual.
thanks in advance,
Robert
I arrived at the dealer and there she was. Patriot blue. Wadda machine!! Until I looked at the fender...V6 thats right V6....
It was time to raise hell, and hell broke loose.
So,, any one looking for a loaded quad cab minus the v8, Its got my name on it??
out thoughts are with you in this time of need,
robert
Every time I think about cancelling, I drive past the dealer, look at the ones on the lot, and convince myself to wait another week. Eric (my salesman), I know you read this forum - I'm getting real impatient.
a newer stlye 2WD Dakota. I need to sell them asap. My truck is a lease and I need to turn it
back in. The body will fit on a 4 wheel drive reg. cab also. The suspension lift is by fabtech.
email me at matthew.goss@gm.com with any questions. My asking price is $100.00 for the body lift (complete) and $175.00 for the suspension (with shocks)
any ideas will be appreciated,
robert
made by Rally cost 12.95 and you can buy it at
K-Mart in the auto. dept. I am going to install
it on my Quad Cab. Good Luck .Skimmilk
made by Rally cost 12.95 and you can buy it at
K-Mart in the auto. dept. I am going to install
it on my Quad Cab. Good Luck .Johnboy9
Also, my dealer called this afternoon, said the truck had just arrived. I pick it up tomorrow!!
cyoungstrom
By the way I had to reorder my quad. They said, wich i dont believe, that they called DC and explained there mistake and requested a rush order,3 to 5 weeks. I dont know about that one. My first order took 3 months.
Fred