Options

Chevy Silverado - Continued XI

1910121415

Comments

  • werkingwerking Member Posts: 431
    twr -
    i'll echo what tim said. 99% of folks come here to do two things. 1) complain about problems they have to see if they're systemic (other people have the same problems) and if so, what people are doing to fix them. 2) to exchange information about accessories, and do-it-yourself kinda stuff (oil/filter changes, lube jobs, etc). i have a 2000 LS 1500, Z71, 5.3L and have not a complaint. truck's been great to me and i wouldn't trade it for the world. oh, some people come here just to heckle ryan too...forgot that one.

    kyle
  • werkingwerking Member Posts: 431
    don't get ryan started on the tundra. he really wanted one but the dealers in his area said he they don't come indigo blue with black flares, and he'd have to install the nerf bars himself. so...he settled for his second choice - the silverado. but we still love him (kinda) anyways. ain't that right fellas?

    kyle
  • ryanbabryanbab Member Posts: 7,240
    What would you guys do without me really???

    Whats this about a lack of positive comments??? I hear the bad and good i have heard alot of i love my truck or my truck is great. I have a 2000 Z71 ext cab 4 door 1500 LS sb 5.3 V-8 and its great no complaints.

    Dont start with the toyota thing im not in the mood.
  • quadrunner500quadrunner500 Member Posts: 2,721
    Here's a comparison of Tundra vs Silverado I wrote back in February, if interested.

    http://members.aol.com/sturbridg1/utahtrek.html
  • khharriskhharris Member Posts: 51
    Does anybody know who has the best deal on the Edelbrock IAS shocks,and what's this royal purple oil that people have been talking about.Just for the record 00 Silverado Z71 1500 LT ext cab 1900 miles and flawless,I think a Tundra would be a big mistake if your looking for a full size truck,tundra's almost full size.

    Kirk
  • rwagonerrwagoner Member Posts: 338
    Considering how many times people in this area have mentioned how much they like their trucks, and the fact that so few have mentioned problems, I can't understand your question. I have seen many, many more problems mentioned on the Tundra board. Heck, the last 100 posts here reflected zerk fittings.

    Richard
  • danogdanog Member Posts: 318
    When I started reading these post again several weeks ago it was because the wifey had the truck and I wanted to see how others were fairing. Now that I have the truck back I have found a few "MINOR" issues that I would not consider to be any reason not to but this vehicle. However, I do see this topic and others as a Databank for everyone to use for problems/fixes, upgrades and enhancements. I am also glad to see that owners such as Ryan, Red, Mike and Kyle to mention a few are willing to lend their information with a touch of humor at times.
    Ryan, about your dent, have you checked on having a paintless dent removal done? We had a door ding removed from our 2001 PF right on the lot and you can't tell it was even there. If it didn't look that good we would have not bought it.

    Thanks all,
    Danog
  • ryanbabryanbab Member Posts: 7,240
    No the dent went along with a very nice scratch that took all the paint off. All that was left was the metal color. Had it fixed 2 wks ago by a local chevy bodyshop looks great cant even tell needs some buffing out and thatll be tough because its in the rear close to the ext cab side by the flare. I have told people the area that got fixed to see if they noticed and no one has yet been able to exactly pin point it not even me.

    Ryan
  • 87lion87lion Member Posts: 166
    I got the Service Manuals from Helm. They are a set of four, each as large as a phone book. That's four times the size of the shop manual I got for my Dakota. However, the manuals Tahoe and Suburban and their GMC counterparts as well.

    I haven't had any use for them yet, but I've paged through them and found some interesting things. I figure if it saves me one trip to the shop it will have saved me the purchase price. Also, even if I have the shop do work I can be an educated consumer.
  • gmcsierragmcsierra Member Posts: 40
    Vince

    I believe it was vince that put the Hellwig rear anti-sway bar on his 3/4 ton truck. How much did it cost and where did you get it? I called ZMotive today (Ad in Truckin' magazine) and they said $119 for a 1/2 ton 2wd plus the roughly $20 bucks to ship it. Were the adjustable pivot end links standard with the kit or were they extra? Did it require drilling any holes? Sorry for the fifth degree, but just wondering how much of a pain it will be to install. Cool pics!

    To the people buying the Helms service manuals, how much are they? Are they the same as are offered in the back of the GM owners manual?

    Has anyone else out there installed rear anti-sway bars on their trucks? If so, what brand and would you recommend it?

    gmc sierra
  • obyoneobyone Member Posts: 7,841
    only time will tell as the paint fades, you may start to see the differences in the paints. just my experience and $.02
  • rwagonerrwagoner Member Posts: 338
    Modern paints are so much more fade-resistant than paints of old, that I would not even consider it a problem any more.

    Richard
  • 2000bill2000bill Member Posts: 15
    The dealers that I have been to here in southern california guarentee their work and the paint with a lifetime guarantee. I had to have my '94 and '97 repaired and painted and they both turned out great. BTW both vehicles were damaged while almost new, both while parked! The '97 was in for maintainence at the dealer, and the mechanic did it. At least he owned up to it. I'm almost afraid to take the 2000 out of the driveway except that I love driving my new Silverado! No problems here. Smooth, quiet and powerful.
  • vince4vince4 Member Posts: 1,268
    The reason you want a stabilizer bar is to prevent body lean. The middle of the bar is connected to the axle and the ends are connected to the frame. When the vehicle leans to the side, the axle gets closer to the frame on one end and farther away on the other. This causes the bar to twist, which it doesn't want to do. For bumps that raise both wheels the same amount, the bar just rotates on the axle and doesn't resist at all. On cars these are used to improve handling with little loss of ride comfort. On trucks it's mainly to handle heavy loads with more stability. I added one because I carry a full size cabover camper which is a very top heavy load. The bar reduces the lean and rocking.

    It took way longer to install because I had to make up for Hellwig's weaknesses. It should take about 2 hours. No drilling is required.

    I bought the bar at http://www.heckethorn.com/ for about $135. They sell them at JC Whitney as well. That $119 price is good. The end links are part of the kit, all bar mounts must have some means of moving front-rear a little. Cars usually have rubber bushings on each end of a shaft.

    By the way gmc sierra, the service manual is from www.helminc.com and is the same factory manual GM sells. It costs $120.
  • bob332bob332 Member Posts: 137
    I have read that GM will offer an option of four-wheel steering on 2002 full size pickups. Yes, that is 2002. Will cut 8 feet off the turning diameter at construction sites, etc. Reduces "turnaround time". Interesting spy report!!! Bob
  • mgdvhmanmgdvhman Member Posts: 4,157
    also help all the dolts who can't park these things.

    It takes some getting used to....but some people just don't understand...turn wide!

    Good luck for GM making it by 2002?

    - Tim
  • obyoneobyone Member Posts: 7,841
    back it in...I currently have a Silverado rental while mine is in the shop. The first time I had it, truck had 400 miles and cherry condition...three weeks later, truck has 1100 miles and a smashed passenger rear door from a lady who thought she was driving a Toyota and turned too quickly right into a pillar. Smash goes from bottom of window to bottom of door and about three inches deep and 11 inches wide...can actually see the impression, color, and texture of the pillar.
  • sharkskinsharkskin Member Posts: 11
    Good Morning everyone. I've been reading your post for the past couple of weeks and I must say you guys really know your stuff. I've been a motor head for the past 25 years (I started young)and I've owned all kinds of cars but I never owned a truck. Well now that times of changed and I can't seem to fit a sheet of plywood or haul bags of fertilizer etc.. in a sports car, I figured its time to turn to a full size truck as my daily driver and weekend work horse. The problem is I want the biggest and badest engine available at the moment (this goes back to my motor head days...its a sickness). I am looking at the Silverado 1500 LT 4x4 with the off road package(yes I want all the candy because I'll probably keep this truck for the next 10-15 years). The biggest engine I can get is a 5.3L at 285Hp. Is this going to change for 2001? I understand that the 2500 HD 6.0 is going to go to 325Hp for 2001 so I was wondering if Chevy is going to upgrade across the board. I tried contacting Chevy but they were no help. They did sent me some info regarding their new Avalanch but that truck looks like its better suited for Yuppies who want to look like they're rugged outdoors men and who have the extra money to burn than for a guy like me who needs to haul lumber and cement and just about everything else.
  • ww00650ww00650 Member Posts: 47
    DMR3 post 525 - It was me who said that. BUT, after I received my bugshield, I reposted stating NOT to get the 18064. - The idiot sales rep sold me the wrong one (it was ordered over the phone from a company that will remain nameless - else my post will be deleted by MereDEATH). 18063 is for the Silverado.
    You gotta read all the posts!

    BOB332 post 585 - Don't know if it'll ever see pavement, but the concept 'GMC Terradyne' sported 4-wheel-steering at the auto-show, along with built-in front whinch, 6 foot box the extends to 8 feet, rear-view Camera in the tailgate, a neat way of SLIDING the doors open, and even used the area between the inside and outside box walls for storage.
  • dmr3dmr3 Member Posts: 119
    WW posted:I reposted stating NOT to get the 18064., You gotta read all the posts!
    --------------------
    Can't..no time..too busy enjoying life. The repost must have been a little bit later, and I prob glanced and figured, shucks I have that info written down. No problem..I spent the extra and got it locally, so they reordered and the new one will be in today.
    For the person concerned that we don't love our trucks..we have the 2000 2WD, 6.0, 4.10, SB,4 door with trailer package (pulls like a dream..ya gotta be careful, you forget that 30 footer is back there!)and electric seats and have had nada a problem. Only things we added were running boards, ARE Cap and duraliner..it has no shutters, shakes or rolls so far!!
    Doris
  • twrtwr Member Posts: 3
    thanks for the info. great story quadrunner500. sorry fellas if i got ryan started again...
  • ryanbabryanbab Member Posts: 7,240
    Dont worry you didnt get me started. They are messing with me im used to it by now. They actually think i was gonna buy a toyota. Yea right for a yr and a half i was "talking" about ordering and buying a truck. im sure some still dont believe me even though i had pics taken not totally up to date yet because of accessories.

    Hey wheres BLUE been lately you know my "internet dad"???

    ARE YOU OUT THERE????????????????? haha

    Ryan
  • mgdvhmanmgdvhman Member Posts: 4,157
    You actually think we thought you would get a toy eh?.....I guess you just answered the question......did we get you started?

    I'd say so...

    LOL

    - Tim
  • ryanbabryanbab Member Posts: 7,240
    TIM you drive me nutz. Your like a mean older brother hahaha.

    Ryan
  • mgdvhmanmgdvhman Member Posts: 4,157
    you are the little bro I never had to pick on....

    Only had a sister...and it ain't the same...although I tried like hell to bug her pretty damn good..

    I've been told by my parents friends and neighbors that I was the instigator....whodu thunkit?.......little old me??...what did I do!?

    Ryan......Gimme you lunch money Bro!

    LOL

    - Tim
  • ryanbabryanbab Member Posts: 7,240
    My wallet is empty haha take whatcha want.

    Was ur sis younger or older than you??? My dad and uncle tortured my aunt they made her be the hockey goalie when they played they tied pillows to her for padding. You did the same didnt you hahaha. Oh the stories you hear as you grow up funny as hell.

    Ryan
  • obyoneobyone Member Posts: 7,841
    GMC is supposedly coming out with a 1500 with the 6.0 in 2001 with its C series trucks go to the link:

    http://www.gmc.com/sierra/c3_index.html
  • ryanbabryanbab Member Posts: 7,240
    UPPERSCALE sierra.

    Looks nice but itll have a price tag watch.

    Ryan

    Im still waiting for that terradyne now thats a truck
  • sharkskinsharkskin Member Posts: 11
    Thanks for the link obyone. It sure looks pretty but I'd be afraid to get it dirty. Its probably going to cost a pretty penny too. Any word on the 5.3L??? By the way, I was looking at some old postings and the topic of Zerks has me wondering.....GM doesn't provide grease fittings for its trucks? Can someone fill me in briefly on this subject as well.
  • ryanbabryanbab Member Posts: 7,240
    Shark try to scroll up and read earlier posts it might be alot easier then them trying to explain it again to you.

    Ryan
  • sharkskinsharkskin Member Posts: 11
    It took awhile but I got it, thanks.
  • ryanbabryanbab Member Posts: 7,240
    Glad you found it.

    i dont understand it and im not gonna try haha

    Ryan
  • obyoneobyone Member Posts: 7,841
    production, the Terradyne will probably cost as much as a HumVee...

    Ryan

    kinda curious. What is it about zerks that you don't understand? and regardless whether you understand or not, it is kinda important... having zerks that is... ;)
  • ryanbabryanbab Member Posts: 7,240
    Yes i dont dispute they are important. Never said they werent. I just didnt pay much attention to the talk about em sorry. I know it has something to do with greasing something under the truck. Oh yea i got under my truck yesterday. Heres the story:

    Went to dairy queen. Came out this girl was out there and she was like nice truck i was like thanks (see its a chick magnet) we got to talking about a half hr. Well she noticed a puddle under my passneger side tire and asked me what it was. Well i check and i hit a puddle of water and it was leaking from the whole underneath of the truck. But i was like wow i didnt even notice it even though it was no big deal. Thats the story sorry to babble oh wait thats my name haha

    Ryan
  • markbuckmarkbuck Member Posts: 1,021
    from your A/C.
  • vince4vince4 Member Posts: 1,268
    Congratulations on your new cable modem, you'll love it. You can spend hours on it while you convalesce.
  • khharriskhharris Member Posts: 51
    Anybody know who has the best price on the Edelbrock shocks and what is this royal purple oil they were talking about,I thought I'd heard of them all.


    Thanks
    Kirk
  • gmcsierragmcsierra Member Posts: 40
    Thanks for the info on the anti-sway bar and the service manual.

    Have fun

    gmc sierra
  • obyoneobyone Member Posts: 7,841
    up to 56K. Been on cable for about 18 months. works well when selecting "see all responses" on Edmunds.

    khharris

    IAS shocks. I got mine at shockwarehouse.com, $69.00 ea. With the 25% coupons, carparts.com has the best deal right now. Just that they can't deliver. Forgot who...may about 40-50 responses back said they were waiting about a month for delivery. Apparently, they got two and are waiting for the other two. Guess it's either price or service...
  • obyoneobyone Member Posts: 7,841
    asking about Royal Purple. Two mechanic friends wee recommending the oil. Apparently, Porche owners swear by this oil, also popular in industrial applications. Found it at Napa for $6.99 a quart/ $5.99 ea case price. Bought a case. Have yet to try it though as I don't have my truck...
  • obyoneobyone Member Posts: 7,841
    should be "were recommending"
  • leavyleavy Member Posts: 34
    If you don't have anything heavy (like a house trailer) to tow, the 1500 should suit you fine. The 5.3 litre is pretty stout for only being 325 cubic inches, I suggest you drive one first before you take the plunge. Also, try driving the 3/4 ton with the 6.0 litre for S&G's if anything else. Yes, the bigger engine has more power and torque, but you take a hit on gas mileage. You gotta pay to play. Also the 3/4 ton weighs an additional 500 to 600 lbs more, so if you're into off the line performance (empty), I'd say the 1/2 ton's got it beat.

    According to the 3/4 ton owners on this site, since it's heaver, it has a better ride.

    Yes they are releasing a 325 horsepower 6.0 litre in the new GMC C - Series, (aluminum heads and a hotter cam), but in my opinion it's one of those car/truck hybrids. From the pictures I've seen, it has street tires and a new all wheel drive system, which probably doesn't have a low range.

    If the 1500 5.3 litre doesn't have enough chutzpah for you (remember, it's not a car), there's always forced induction. If you want to shell out an additional 4k, Whipple makes a nice supercharger kit, featured in many trucking magazines.

    Hope this helps.

    R Leavy
  • jstockhamjstockham Member Posts: 3
    I just bought my 2000 LS z71 and it was out of alignment, is that normal for a new truck? mechanic told me that chevy was sending a lot of them out, with alignment problems. other than that my truck is great! love the power from the 5.3 ltr. I traded in my 97 tacoma for it. the tundra did not seem as nice as the chevy. so I bought the chevy.
  • mgdvhmanmgdvhman Member Posts: 4,157
    ..yeah...but you never go past 42K around here with a 56K....phone lines just are not that clean.
    The small jump was not worth it.

    - Tim
  • ryanbabryanbab Member Posts: 7,240
    Hey man hope you get better soon. get some rest


    Ryan
  • obyoneobyone Member Posts: 7,841
    is a big jump..like going from a four banger to a V8...or like a tacoma to a vette... ;)

    jstockham
    If that was the only thing "wrong" with your truck...consider yourself lucky...I didn't consider the Tundra either...looked too much like a FORD.
  • dropperdropper Member Posts: 47
    Mine was too. Not bad, just pulled to the right. I have seen others here with the same issue. My dealer had it aligned, drives true ever since.

    Keith
  • werkingwerking Member Posts: 431
    yep...mine pulled to the right too. they fixed it up...now drives straight and true.

    kyle
  • bob332bob332 Member Posts: 137
    I expect GM will continue to make the same engines, etc., available in both GMC and Chevrolet. If available for one, then also available for the other one. Bob
  • obyoneobyone Member Posts: 7,841
    I agree though it might not be in the coming year as with the C series. Like the way they delayed the upgrading of the Denali and Escalade one year. Then again...Chevy doesn't have an equivalent to the Denali...
This discussion has been closed.